Tatung Company L5CNS Manuel D’Utilisation
Warning
To completely disconnect power from your display, you
must remove the power cord from the wall outlet and then
remove the power cable from the display.
must remove the power cord from the wall outlet and then
remove the power cable from the display.
Features
Important features include:
Ö Automatic configuration to the PC video settings with maximum XGA resolution.
Ö Three control buttons plus OSD (on-screen display) for monitor settings adjustment and
configuration with ease and instant feedback.
Ö Support analog video input for direct and immediate replacement of CRT displays.
Ö A tilt feature to optimize viewing position.
Ö An anti-glare coating on the panel to reduce the reflection of ambient light.
Ö Flicker-free performance across all recommended video modes.
Ö Support for high refresh rates up to 75 Hz.
Ö VESA DDC2B Plug-and-Display compliant.
Ö A Power-saving feature that is compatible with Microsoft
®
Windows
Ö Compliance with Swedish MPR II guidelines for reduced electromagnetic emissions.
For Your Safety
For your safety and the protection of your monitor, follow these precautions:
Ö Use only the factory-supplied power cord that shipped with your monitor.
Ö To prevent electrical shock, do not disassemble the display. The cover should be removed
only by qualified service personnel.
Ö Do not cover the air vents.
Ö To avoid the risk of damage to the display and electrical shock to yourself, do not expose the
display to rain or moisture.
If any of the following conditions occur, unplug the display and contact qualified service
personnel:
personnel:
Ö The power cord or plug is frayed or damaged.
Ö You have spilled liquid into the display.
Ö The display has been exposed to rain or water.
Ö The display does not operate correctly when the operating instructions are followed.
Ö The display has been dropped or the cabinet has been damaged.
* Only for use with supplied adapter, in case of loss or damage contact the retailer for
replacement