Tatung Company L5CNS Manuel D’Utilisation

Installation

Please follow the instructions in this chapter to install your LCD Monitor.

Note:

Before connecting your display, first read through the instructions in this chapter and the

safety precautions in the previous chapter.

Unpacking the Display

When you are unpacking the display, make sure that you have the following items:

Ö The LCD monitor

Ö AC power adapter with attached power cable

Ö A power cord

Ö Analog video signal cable

Ö The User's Manual

Note:

Place the display on a flat, sturdy surface. Choose an area free from excessive heat, moisture,

and sunlight.

Locations and Functions of Controls

There are three control buttons and one power button on the front panel of the display, as well as a
LED for power status indication.

You will use the power button located at the lower right side of the front panel of your display to
turn on and off the display.

The functions of the three control buttons which are located at the lower left side of the front panel
of your display. Their functions are described as below:

Button

Function Description

Select

(1)   Turn on OSD menu while it is off.
(2)   Execute the function selected in the OSD menu.
(3)   Hold down for 2 sec will clear OSD menu.

Up (△)

(1) Item selection move upward or user-adjustable value

increasing. (in Main Menu).

(2) Brightness (Direct-key function)

Down (▽)

(1) Item selection move downward, user-adjustable value

decreasing (in Main Menu)

(2) Auto Setup (Direct-key function).