Tyco Safety Products/Sensormatic AMS1080 Manuel D’Utilisation
AMS-1080 DETECTION SYSTEM
8200-0418-01, REV. A
INSTALLATION AND SERVICE GUIDE
9 of 18
AMS-1080 Antenna
Installation
Installation
The AMS-1080 antenna can be mounted against a
wall or counter, or to a railing post.
wall or counter, or to a railing post.
Against a Wall or Counter
For this installation, the antenna is secured to the
floor and top edge of the checkout counter.
floor and top edge of the checkout counter.
Tools required:
- Tape measure and level
- Pencil or marker
- Knife
- Electric drill and drill bits: 5.5mm (7/32in) masonry,
- Pencil or marker
- Knife
- Electric drill and drill bits: 5.5mm (7/32in) masonry,
3.2mm (1/8in), 6.4mm (1/4in), and 9.5mm (3/8in)
- Phillips-head screwdriver or bit
- Hammer and nail set
- Hand vacuum or broom
- Pliers or 9.5mm (3/8in) wrench
- Wiremold
- Hammer and nail set
- Hand vacuum or broom
- Pliers or 9.5mm (3/8in) wrench
- Wiremold
(optional)
- Trenching tool such as a floor saw (if necessary).
Parts required:
Install Kit 0352-0199-01
Mounting base, antenna
1
0505-1022-01
Anchor with washer and nut
2
2880-0111-01
Bracket, antenna mounting base
1
0505-0872-01
Screw, Phillips, FH, M5
1
5801-3102-120
Washer, M5
1
5840-0400-020
Nut, locking, M5
1
5826-0400-011
Clamp, straight
2
0505-0184-01
Spacer (left)
1
0404-0229-01
Spacer (right)
1
0404-0229-02
Screw, M5x12
1
5801-3072-120
Screw, self-drilling, Phillips, M4
2
5899-0031-05
Screw, Phillips, M5x50
2
5801-3151-111
Washer, floating, M5
2
5842-0400-020
Washer, locking, M5
2
5847-0400-020
Nut, M5
2
5827-0400-020
Spacer Kit 0352-0205-01
Spacer (left)
2
0404-0229-01
Spacer (right)
2
0404-0229-02
IMPORTANT!
Keep the antenna at least
5cm (2in) from metal surfaces. As
necessary, add spacers and adjust the
mounting base assembly to maintain this
separation.
necessary, add spacers and adjust the
mounting base assembly to maintain this
separation.
Clamp
Mounting Bracket
Mounting Base
Spacer