Tyco Safety Products/Sensormatic IDRDR2 Manuel D’Utilisation
AGILE2 READER
8200-0222-08, REV. A
INSTALLATION AND SERVICE GUIDE
7 of 13
Service
Using the Browser-Based
Interface
Interface
The Agile2 Reader tag reader browser-based
interface communicates directly with the RFID
reader. It includes several tools that let you monitor
reader performance, change reader settings, and
upgrade reader firmware.
interface communicates directly with the RFID
reader. It includes several tools that let you monitor
reader performance, change reader settings, and
upgrade reader firmware.
A navigation menu provides access to the following
pages:
• Status—displays basic operational settings.
• Query—allows the user to set frequency of
pages:
• Status—displays basic operational settings.
• Query—allows the user to set frequency of
operation, set antennas, set RF air interface
protocols, and read tags.
protocols, and read tags.
• Write—allows the user to write tags; this is only
applicable to tags that are writeable.
• Settings—allows the user to modify network
settings.
• Firmware—this page can be used to upgrade
the tag reader with new firmware images
supplied by ThingMagic.
supplied by ThingMagic.
• Restart—allows the user to restart the reader.
• Diagnostics—this page provides the current
• Diagnostics—this page provides the current
operating settings of the reader.
• Help—this page provides information that is
helpful in operating the tag reader.
The browser-based interface can be run from any
PC on the network. Care must be taken to
configure the PC with an IP address and subnet
mask compatible with the current operational
settings of the reader.
PC on the network. Care must be taken to
configure the PC with an IP address and subnet
mask compatible with the current operational
settings of the reader.
To start the browser-based interface:
1. Exit all reader applications on the network.
IMPORTANT: Running another reader
application while using the browser-based
interface may cause a reader error. If this
happens, reboot the reader or restart it using
the browser-based interface.
application while using the browser-based
interface may cause a reader error. If this
happens, reboot the reader or restart it using
the browser-based interface.
2. Start a Java-enabled web browser from any
network-enabled PC.
3. Type the IP address of the reader you want to
communicate with into the Address field of the
browser.
browser.
4. A navigation menu and the Status page appear
in the browser.
Status Page
The Agile2 Reader Status page shows the current
settings of the reader.
settings of the reader.
1. Click the Status link in the navigation menu to
display the Status page.
2. Close the browser window if you are finished
using the browser-based interface.
Query Page
Use the Query page to monitor reader
performance. The Query page is useful for
verifying performance when installation is complete
and for troubleshooting performance issues.
performance. The Query page is useful for
verifying performance when installation is complete
and for troubleshooting performance issues.
The Query field includes a drop-down list (at the
bottom-right of the screen) that enables you to
specify the operating mode. The operating mode
specifies the tag protocols and antenna ports to be
used in conjunction with the Query page.
bottom-right of the screen) that enables you to
specify the operating mode. The operating mode
specifies the tag protocols and antenna ports to be
used in conjunction with the Query page.
Note: The selected settings DO NOT affect reader
performance associated with other applications.
performance associated with other applications.
Navigation menu