Tyco Safety Products/Sensormatic IDX8000NA Manuel D’Utilisation
PRELIMINARY
Regulatory Information
Power Supply
Use only the Sensormatic Electronics power supply provided with this unit or other
power supply approved by and obtained from Sensormatic for use with this
product.
power supply approved by and obtained from Sensormatic for use with this
product.
Approved Antennas
This device has been designed to operate only with the approved antennas
described in the table below. Approved antennas must be connected using the
cables supplied with them. Use of antennas not on this approved list will not be
supported by Sensormatic and may damage the device as well as violate local
regulations.
described in the table below. Approved antennas must be connected using the
cables supplied with them. Use of antennas not on this approved list will not be
supported by Sensormatic and may damage the device as well as violate local
regulations.
This device has been designed to operate with the antennas listed below, and
having a maximum gain of 6dB. Antennas not included in this list or having a gain
greater than 6dB are strictly prohibited for use with this device. The required
antenna impedance is 50 ohms.
having a maximum gain of 6dB. Antennas not included in this list or having a gain
greater than 6dB are strictly prohibited for use with this device. The required
antenna impedance is 50 ohms.
This radio transmitter
IC: 3506A-IDX8000NA has been approved by Industry
Canada to operate with the antenna types listed below with the maximum
permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum
gain indicated for that type, are strictly prohibited for use with this device.
permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum
gain indicated for that type, are strictly prohibited for use with this device.
Manufacturer
Model Number
Polarization
Composite
Gain
Gain
Sensormatic
IDA-1000-US / IDA-1000-EU
RHCP
3.3dBiL
Sensormatic
IDA-2100-US
RHCP
6.0dBiL
Sensormatic
IDA-2100-EU
RHCP
5.15dBiL
Sensormatic
IDKM-1000 / IDKM-1010
near field
–8.5dBiL
Motorola (Symbol) AN480-CL66100WR
LHCP
6.0dBiL
Motorola (Symbol) AN480-CR66100WR
RHCP
6.0dBiL
Remote and Standalone Antenna Configurations
The antennas used with this transmitter must be installed to provide a minimum
separation distance of 20cm (7.9in) from all persons and must not be co-located or
operated in conjunction with any other antenna or transmitter.
separation distance of 20cm (7.9in) from all persons and must not be co-located or
operated in conjunction with any other antenna or transmitter.
Frequency of Operation
Model
Frequency band
Max Power
IDX-8000-NA
902
– 928 MHz
4W EIRP
IDX-8000-EU
865.7
– 867.5 MHz
2W ERP
Wireless Devices
If frequency is selectable for your model, select only the country in which you are
using the device. Any other selection will make the operation of this device illegal.
using the device. Any other selection will make the operation of this device illegal.
Declarations
All Sensormatic devices are compliant with rules and regulations in locations in
which they are sold and are labeled, as required. Any changes or modifications to
Sensormatic equipment, not expressly approved, in writing, by Sensormatic could
void the authority to operate the equipment.
which they are sold and are labeled, as required. Any changes or modifications to
Sensormatic equipment, not expressly approved, in writing, by Sensormatic could
void the authority to operate the equipment.
EMC
47 CFR, Part 15
IDX-8000-NA
ICES-003
IDX-8000-NA
RSS-210
IDX-8000-NA
EN 302 208
IDX-8000-EU
EN 301 489
IDX-8000-EU
Safety
UL 60950-1
IDX-8000-NA
CSA-C22.2.60950-1
IDX-8000-NA
EN 60950-1
IDX-8000-EU
Federal Communications Commission (FCC): IDX-8000-NA
FCC ID: BVCIDX8000NA
This equipment complies with Part 15 of the FCC rules for intentional radiators and
Class A digital devices when installed and used in accordance with the instruction
manual. Following these rules provides reasonable protection against harmful
interference from equipment operated in a commercial area. This equipment should
not be installed in a residential area as it can radiate radio frequency energy that
could interfere with radio communications, a situation the user would have to fix at
their own expense.
Class A digital devices when installed and used in accordance with the instruction
manual. Following these rules provides reasonable protection against harmful
interference from equipment operated in a commercial area. This equipment should
not be installed in a residential area as it can radiate radio frequency energy that
could interfere with radio communications, a situation the user would have to fix at
their own expense.
Equipment changes or modifications not expressly approved by Sensormatic
Electronics, LLC, the party responsible for FCC compliance, could void t
Electronics, LLC, the party responsible for FCC compliance, could void t
he user’s
authority to operate the equipment and could create a hazardous condition.
Industry Canada (IC): IDX-8000-NA
IC: 3506A-IDX8000NA
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptibl
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptibl
e d’en compromettre le fonctionnement.
This Class B digital device complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Canada.
Restriction of Hazardous Substances Directive (RoHS)
All parts and components are manufactured in accordance to and be compliant
with the “DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF
THE COUNCIL of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.”
with the “DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF
THE COUNCIL of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.”
Service
If a problem using the equipment occurs, contact the facility Technical or Systems
Support. If there is a problem with the equipment, contact Sensormatic Technical
Support at
Support. If there is a problem with the equipment, contact Sensormatic Technical
Support at
© 2012 Sensormatic Electronics, LLC. All rights reserved.
Sensormatic Electronics, LLC makes no representation or warranty with respect to the contents
hereof and specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose. Further, Sensormatic Electronics, LLC reserves the right to revise this
publication and make changes from time to time in the content hereof without obligation of
Sensormatic Electronics, LLC to notify any person of such revision or changes.
hereof and specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose. Further, Sensormatic Electronics, LLC reserves the right to revise this
publication and make changes from time to time in the content hereof without obligation of
Sensormatic Electronics, LLC to notify any person of such revision or changes.
Sensormatic and the Sensormatic logo are registered trademarks of Sensormatic Electronics,
LLC. All other product names or company names mentioned in this document may be
trademarks or registered trademarks of their respective companies and are hereby
acknowledged.
LLC. All other product names or company names mentioned in this document may be
trademarks or registered trademarks of their respective companies and are hereby
acknowledged.
Sensormatic Electronics, LLC
6600 Congress Ave.
Boca Raton, FL 33487
6600 Congress Ave.
Boca Raton, FL 33487
Part Number: 8200-2697-12, Rev. 1.0b