HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 104
•
System sync mode
8.8.1
Enabling OTA registration mode
Use this setting to enable or disable system pairing mode. Enable this mode if you
want to register a beltpack over the air.
want to register a beltpack over the air.
1)
To enter the beltpack menu, press and hold the Menu key.
2)
Use the rotary and Menu Select keys to select Settings > Admin
Options. You will be prompted to enter a four digit code. The default code
is 4632.
Options. You will be prompted to enter a four digit code. The default code
is 4632.
3)
Select Enable Pair Mode.
4)
Use either rotary control to select between:
•
Disable
•
Enable
5)
To confirm the selection and exit the menu screen, press the Menu
Select key (D).
Select key (D).
8.8.2
Setting full menu access
Use this setting to override the menu access for the beltpack role. The following
menu access levels apply:
menu access levels apply:
•
None
•
Basic
•
Normal
•
Advanced
If this setting is not enabled, the menu access is set in the EHX software to one of
the above four levels. When it is enabled, the beltpack has full menu access.
the above four levels. When it is enabled, the beltpack has full menu access.
Note:
If you change this setting, it will apply until the beltpack role changes, or the
beltpack is power cycled.
beltpack is power cycled.
1)
To enter the beltpack menu, press and hold the Menu key.
2)
Use the rotary and Menu Select keys to select Settings > Admin
Options. You will be prompted to enter a four digit code. The default code
is 4632.
Options. You will be prompted to enter a four digit code. The default code
is 4632.
3)
Select Full Menu Access.