HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 105
4)
Use either rotary control to select between:
•
Disable (default)
•
Enable
8.8.3
Setting system sync mode
Use this setting to make antenna synchronization readings.
1)
To enter the beltpack menu, press and hold the Menu key.
2)
Use the rotary and Menu Select keys to select Settings > Admin
Options. You will be prompted to enter a four digit code. The default code
is 4632.
Options. You will be prompted to enter a four digit code. The default code
is 4632.
3)
Select System Sync.
4)
Use either rotary control to select the antenna group to synchronize.
8.9
Setting the listen again option
Use this setting to configure an option to allow you to play back an incoming
message. When Listen Again is active, if you tap the Menu key on the beltpack,
the last received message is played back. You can select the length of the
recorded message, and also how long the message is stored on the beltpack
before automatic deletion. To play back a recorded message, press the Menu
button.
message. When Listen Again is active, if you tap the Menu key on the beltpack,
the last received message is played back. You can select the length of the
recorded message, and also how long the message is stored on the beltpack
before automatic deletion. To play back a recorded message, press the Menu
button.
To select the length of the recording:
1)
To enter the beltpack menu, press and hold the Menu key.
2)
Use the rotary and Menu Select keys to select Settings > Listen Again
Opt > Recording Time.
Opt > Recording Time.
3)
Use either rotary control to select a value between Off and 15 seconds.
To determine how long the message is stored:
1)
To enter the beltpack menu, press and hold the Menu key.
2)
Use the rotary and Menu Select keys to select Settings > Listen Again
Opt > Auto Delete Time.
Opt > Auto Delete Time.
3)
Use either rotary control to select a value between Off and 240 minutes.