HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 133
disabled the audio route is only open when the key is pressed. To enable key
latching:
latching:
•
Select the Latching Talk Keys checkbox. The factory default is latching
disabled.
disabled.
Partyline display mode
Use this option to determine whether the beltpack can display in partyline mode.
Dimmed tallies
Use this option to enable dimmed tally lights. When enabled, keys will always
show a dimmed state of the active state. The factory default is enabled.
show a dimmed state of the active state. The factory default is enabled.
10.4.8
Assigning beltpack keys
You can use Configuration Editor to assign destinations for each of the four
beltpack talk keys, A, B, C and D.
beltpack talk keys, A, B, C and D.
Figure 10-10 Beltpack Key Assignments
1)
From the Name list, select the beltpack.
2)
Click on the down arrow beside each window to open a drop-down menu
of all the available ports or key types and select the required item. The
selected item will appear in the window.
of all the available ports or key types and select the required item. The
selected item will appear in the window.
Note:
If the key assignment is ‘----’ then the beltpack key is locked and
cannot be used.
cannot be used.
For an explanation of the available port types abbreviations see Table 10-1
Available port types.
Available port types.