HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 134
Abbreviation
Meaning
HDSTA
Front panel headset on channel A
HDSTB
Front panel headset on channel B
4WIR1, 4WIR2, 4WIR3, 4WIR4
Four Base station 4-wire output ports
PLCHA
Partyline channel A
PLCHB
Partyline channel B
STGAN
Stage announce output
PRGRM
Program input
BPK01 to BPK20
One of up to twenty beltpacks
GRP01 to GRP05
One of up to five configured groups
WPL01 to WPL05
One of up to five wireless partylines
IFB1 to IFB10
One of up to 10 interruptible foldbacks
Table 10-1 Available port types
Use the Copy and Paste buttons to copy the setup of the current beltpack and
paste that setup onto another beltpack. This allows you to quickly configure
beltpacks when many have the same setup.
paste that setup onto another beltpack. This allows you to quickly configure
beltpacks when many have the same setup.
Use the Clear button to clear all key assignments for the current beltpack.
10.4.9
Configuring the Reply key
You can configure the Reply key in the following ways:
•
As a Reply key. You can reply to the call by pushing the REPLY key (this
is the default setting for this key).
is the default setting for this key).
•
Assigning a talk/listen destination. Pushing the Reply key calls this
destination. For example, if you select STGAN from the list, the label
STGAN appears in the display. You can always activate the stage
announce by pushing the REPLY key. The key type will be enabled
allowing the reply key to be configured.
destination. For example, if you select STGAN from the list, the label
STGAN appears in the display. You can always activate the stage
announce by pushing the REPLY key. The key type will be enabled
allowing the reply key to be configured.
•
Locked. Selecting ---- de-activates the reply key. Five dashes ----- appear
in the reply key label.
in the reply key label.
Note:
In the last two cases there is no mechanism for replying to sources that call the
beltpack which do not have keys on the beltpack assigned to them.
beltpack which do not have keys on the beltpack assigned to them.
To configure as a reply key:
1)
From the Name list, select the beltpack.
2)
From the Reply key list, select REPLY.
To assign a call destination: