HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 38
Figure 4-4 Wireless partyline Audio Flow
This facility allows conferencing over a large area between a mix of beltpacks,
partyline stations and Eclipse system panels through an FS II Base station.
partyline stations and Eclipse system panels through an FS II Base station.
FS II beltpacks can only connect to a wired partyline via a wireless partyline.
Therefore in order to allow beltpacks to talk to each other and a wired partyline a
wireless partyline must be set up that includes the wired partyline (PLCHA or
PLCHB) and the beltpacks (see Figure 4-5 Connecting beltpacks to a wired
partyline). This ensures that the audio on the beltpacks is the talk audio and not
the sidetone audio.
Therefore in order to allow beltpacks to talk to each other and a wired partyline a
wireless partyline must be set up that includes the wired partyline (PLCHA or
PLCHB) and the beltpacks (see Figure 4-5 Connecting beltpacks to a wired
partyline). This ensures that the audio on the beltpacks is the talk audio and not
the sidetone audio.
Figure 4-5 Connecting beltpacks to a wired partyline
4.4
Connecting to 4-Wire and digital matrix intercom
Up to four channels of 4-wire/digital matrix intercom can be connected to the FS
II Base station. The descriptions below will discuss connections with Clear-Com
Matrix Plus digital matrix, Clear-Com Eclipse digital matrix, other brands of digital
II Base station. The descriptions below will discuss connections with Clear-Com
Matrix Plus digital matrix, Clear-Com Eclipse digital matrix, other brands of digital
Wireless Party Line
Group
(WPLG)
Auto
Nulling
Party Line
Channel A
(PLCHA)
BP1
BP2
Audio from
BP1
Audio to BP1
Audio from
BP2
Audio to BP2
Audio from
Party Line A
Audio to
Party Line A
Wireless Party Line
Group
(WPLG)
Party Line
Channel A
(PLCHA)
BP1
BP2
Audio from
BP1
Audio to BP2
Audio from
Party Line A
Audio to
Party Line A
BP3
Audio to BP3