HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 40
4.4.2
Connecting to Clear-Com matrix plus
The connection between a Matrix Plus digital intercom port and an FS II 4-wire
port is accomplished with a standard 4-pair straight-through CAT-5 data cable
with RJ-45 connectors on both ends. In the current generation of FS II, the audio
input and audio output pairs are all that will be used.
port is accomplished with a standard 4-pair straight-through CAT-5 data cable
with RJ-45 connectors on both ends. In the current generation of FS II, the audio
input and audio output pairs are all that will be used.
In the Matrix Plus PGM-WIN configuration software, set the matrix port that is
connected to the FS-BASE Base station 4-wire port to “4-Wire”. If the label of this
FS II 4-wire port is to be put onto more than one intercom panel within the matrix
system, and any and all people who have activated a talk/listen to that port are to
be able to hear each other, as well as hearing the person talking to them from the
FS II wireless beltpack, also check “Partyline Enable” for that 4-Wire connection in
the configuration software.
connected to the FS-BASE Base station 4-wire port to “4-Wire”. If the label of this
FS II 4-wire port is to be put onto more than one intercom panel within the matrix
system, and any and all people who have activated a talk/listen to that port are to
be able to hear each other, as well as hearing the person talking to them from the
FS II wireless beltpack, also check “Partyline Enable” for that 4-Wire connection in
the configuration software.
Within the FS II Base station configuration software, the user can adjust the input
and output level for that port. Alternately, the input and output levels can be
adjusted on the FS II Base station for the particular 4-wire port, using the front-
panel display. Repeat the procedure for each FS II 4-wire port that is connected
with the Matrix Plus system.
and output level for that port. Alternately, the input and output levels can be
adjusted on the FS II Base station for the particular 4-wire port, using the front-
panel display. Repeat the procedure for each FS II 4-wire port that is connected
with the Matrix Plus system.
Note:
FS II does not currently generate a call signal to the Matrix port.
4.4.3
Connecting to Clear-Com Eclipse digital matrix
The procedure to connect between an FS II 4-wire port and the Eclipse digital
matrix is similar to that of Matrix Plus 3. An identical connection is made with 4-
pair straight-through CAT-5 cable between an Eclipse port and the FS II port.
matrix is similar to that of Matrix Plus 3. An identical connection is made with 4-
pair straight-through CAT-5 cable between an Eclipse port and the FS II port.
Within the Eclipse Configuration System software (EHX) or ECS 5.2, set the port
to “Direct.” This will allow intercom stations in the Eclipse system to converse with
the FS II Base station and beltpacks. Because there is not a “Partyline Enable”
within Eclipse, if several users of intercom stations connected with Eclipse need to
hear each other as well as the wireless FS II beltpack, another procedure will
need to be added. Within the configuration software, the user would create a new
partyline label, with members including the desired intercom stations and the
particular FS II 4-wire port. That label would then be assigned to a key on each of
the intercom stations, allowing connection with the FS II 4-wire port and the other
members of the new partyline.
to “Direct.” This will allow intercom stations in the Eclipse system to converse with
the FS II Base station and beltpacks. Because there is not a “Partyline Enable”
within Eclipse, if several users of intercom stations connected with Eclipse need to
hear each other as well as the wireless FS II beltpack, another procedure will
need to be added. Within the configuration software, the user would create a new
partyline label, with members including the desired intercom stations and the
particular FS II 4-wire port. That label would then be assigned to a key on each of
the intercom stations, allowing connection with the FS II 4-wire port and the other
members of the new partyline.
Within the FS II Base station configuration software, the user can adjust the input
and output level for that port. Alternately, the input and output levels can be
adjusted on the FS II Base station for the particular 4-wire port, using the front-
panel display. Repeat the procedure for each FS II 4-wire port that is connected
with the Eclipse system.
and output level for that port. Alternately, the input and output levels can be
adjusted on the FS II Base station for the particular 4-wire port, using the front-
panel display. Repeat the procedure for each FS II 4-wire port that is connected
with the Eclipse system.