HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 74
Figure 6-41 Partyline noise gate options menu
Scroll through the options to enable or disable the noise gate and use the enter
function to select the required state. The main noise gate menu will be
redisplayed.
function to select the required state. The main noise gate menu will be
redisplayed.
5)
Select the level entry to display the partyline level setup menu.
Figure 6-42 Partyline noise gate trigger level
The vertical bar indicates the noise gate trigger level. Turning the setup encoder
clockwise increases the noise gate level (towards the maximum -10dB) and
turning it counter clockwise reduces the noise gate level (towards -70dB). The
horizontal bar indicates the current input audio level in real-time to assist in
setting the noise gate level.
clockwise increases the noise gate level (towards the maximum -10dB) and
turning it counter clockwise reduces the noise gate level (towards -70dB). The
horizontal bar indicates the current input audio level in real-time to assist in
setting the noise gate level.
6)
Select the ‘DELAY’ option on the noise gate menu to set the VOX off delay
level. This allows the operator to set a delay in milliseconds before audio
is cut by the noise gate.
level. This allows the operator to set a delay in milliseconds before audio
is cut by the noise gate.
Figure 6-43 VOX delay setup
The VOX delay can be set to values between 50ms and 5000ms in 50ms steps.
Turn the Setup encoder clockwise to increase the delay and anticlockwise to
reduce the delay.
Turn the Setup encoder clockwise to increase the delay and anticlockwise to
reduce the delay.
6.15.3
To configure the levels for a partyline port
The Levels menu allows Input, Output and nulling levels to be set for a partyline.
Note:
Please do not auto-null from this menu option.
1)
Select the partyline port and then select ‘LEVELS’ from the partyline menu
to display the levels menu.
to display the levels menu.