Digital Monitoring Products Inc PC0132 Manuel D’Utilisation

Access the User Menu by pressing the Keypad icon in the carousel menu on the main 

screen, then press CMD until MENU? NO YES displays.
From the User Menu, select USER CODES. Choose ADD. At the ENTER CODE: - display, 

present the credential to the reader. The keypad works by reading the 4 to 10-digit 

user code from the data sent by the access control reader. For more information, 

refer to Entry Cards in the programming section of this document and the panel 

User’s Guide section on adding, deleting, and changing user codes.

DMP Keypads with internal proximity readers are compatible with most standard 

125Khz Prox credentials available from HID and all DMP proximity credentials. DMP 

Keypads are not compatible with iClass.
There are custom and non-standard credentials from HID that are not compatible 

with DMP proximity keypads. If you are using HID cards that have not been purchased 

directly from DMP, it is recommended to thoroughly test the application fully before 

installation. DMP does not guarantee compatibility with credentials not purchased 

from DMP.

The 9863 keypad provides one internal programmable Form C single pole, double 

throw (SPDT) relay for controlling door strikes or magnetic locks. Three wires on the 

5-wire harness, Violet (N/C), Gray (Com), and Orange (N/O), allow you to connect 

devices to the relay. The Form C relay draws up to 15mA of current and the contacts 

are rated for 1 Amp at 30 VDC maximum, resistive. See Figure 9.