Conifer Corporation 2278 Manuel D’Utilisation
INSTALLATION / ASSEMBLY
with 18T-2127 Response Antenna
1. Place the sub-reflector on the
front of the feed and secure
with the #6 x 1/2" stainless
screw. (See Figure 1).
with the #6 x 1/2" stainless
screw. (See Figure 1).
2. Determine the polarity of the
antenna. (See figures 2 & 3).
Figure 1
Sub-reflector
Figure 2
Figure 3
Horizontal Polarity
Vertical Polarity
Page 5.
1. Assemble the two halves
inserting the 4 #8-32
machine screws through
the front. Secure with
the keps nuts on the back.
(See Figure 3).
machine screws through
the front. Secure with
the keps nuts on the back.
(See Figure 3).
Vertical Polarity
Figure 2
Note: Loosely tighten
all hardware until
completely assembled
and then tighten
securely.
all hardware until
completely assembled
and then tighten
securely.
INSTALLATION / ASSEMBLY
with 26T-2127 Response Antenna
Horizontal Polarity:
Refer to (figure 1) for proper feed
alignment.
alignment.
Vertical Polarity:
Refer to (figure 2) for proper feed
alignment.
alignment.
3. Determine the polarity of
the antenna.
(See Figures 1 & 2).
(See Figures 1 & 2).
2. Place the sub-reflector on
the front of the feed and
secure with the #6 x 1/2”
stainless screw. (See
Figure 4).
secure with the #6 x 1/2”
stainless screw. (See
Figure 4).
Figure 1
Horizontal Polarity
Page 8.
Model 18T-2127
Model 18T-2127
Model 18T-2127