Lectrosonics Inc SMV Manuel D’Utilisation

Professional Audio Products Since 1971

as show in the chart below with only
occassional forays into the +0 dB to +10 dB
range.)

Setting the audio level to high reduces the dynamic
range of if the audio signal. Setting the audio level
to low may cause hiss and noise in the audio.

5) Once the SM’s audio gain has been set, the

remaining components of the audio system
can be energized and adjusted.

Control Panel Locked

LOCKING OR UNLOCKING THE CONTROL
PANEL

The Lock/Unlock function insures against unwanted
operational changes to the SM during normal operation.

Note

The Locked/Unlocked status is non-volitile and is preserved even if

the unit is turned off.

1) Ensure the SM setup is complete (operating

frequency, Compatibility Mode, audio level,
etc.).

2) Simultaneously press both

the Up and Down arrow
buttons. An “L” is
displayed on the LCD.
The LCD will return to the
previous display when these buttons are
released.

3) To Unlock the Control

Panel, repeat Step 4. A
“unL” is displayed on the
LCD.

unL

Control Panel Unlocked

Signal Level

Less than -20 dB

-20 dB to -10 dB

-10 dB to +0 dB

+0 dB to +10 dB

Greater than +10 dB

-20 LED -10 LED

Off

Green

Red

Off

Green

Red