Lectrosonics Inc SMV Manuel D’Utilisation

SM

Five screens are used to set up and operate the SM.
These screens are used to set the operating frequency,
adjust the audio modulation level, select the Compatibil-
ity Mode, lock or unlock the control panel and power
down the transmitter

The Frequency Screen displays
the operating frequency in MHz
when the system is initially
turned on.  Pressing the FREQ
button displays the operating
frequency as a two-digit hexa-
decimal number that corre-
sponds to the equivalent Lectrosonics Frequency Switch
Setting.

Pressing the AUDIO button
during normal operation displays
the current audio input level
setting.

Holding down the Up arrow button while powering up the
SM opens the Compatibility
Mode screen.  By using the Up
or Down arrow buttons, the user
can select one of five compatibil-
ity modes:

•

400 - This is the factory default setting and works

with all Lectrosonics 400 Series Digital Hybrid
Wireless

™

 receivers.  This mode offers the best

audio quality.

•

200 - This mode works with all Lectrosonics 200

Series compatible receivers.

•

100 - This mode works with all Lectrosonics 100

Series compatible receivers.

644.400

CH   2C

Aud  12

CP 400

•

3 - (Mode 3) This mode works with a number of

non-Lectrosonics analog receivers.  Contact the
company for a list of compatible receivers.

•

IFB -  This mode works with all Lectrosonics IFB

compatible receivers.

Pressing either the AUDIO or FREQ button leaves this
screen and accesses the screen associated with the
button that was pushed.

Simultaneously pressing both the
Up and Down arrow buttons
during normal operation toggles
between locking and unlocking
the front panel controls.  (If the
control panel was locked when
the buttons are pushed, it will
toggle to the unlocked condition.)
The LCD will display the Locked/Unlocked condition
while the arrow buttons are pressed, then revert back to
the previous screen when either button is released.

While the AUDIO and FREQ buttons can be used to
display current settings, any attempt to change a setting
by pressing either the Up or Down arrow button when the
Control Panel is locked will temporarily display an “L” in
the LCD.

Simultaneously holding the
AUDIO and FREQ buttons while
the unit is operating displays the
Power Off Timer screen.  The
screen counts down from three
to zero.  Releasing either button
prior to the Power Off Timer
screen indicating zero returns
the unit to normal operation and
displays the previous screen.

The unit turns off only when the Power Off Timer
reaches zero and the AUDIO and FREQ buttons are
released.

L

unL

oFF . . .3

oFF . . .0