Checkpoint Systems Inc. FISOLRR Manuel D’Utilisation

1-26

I L S   O p e n   P l u s   3 . 0   I n s t a l l a t i o n   M a n u a l

•

The distance from tag to tag should be greater than 10 cm (3.9”). If the tag to tag 
distance is reduced, the gate distance GD must be reduced correspondingly. This 
applies in particular to distances under 5 cm (2”).

•

The maximum number of tags (serial number or data) depends on the traverse speed 
with which the tags are brought through the capture area of the gate. The number of 
tags may be increased in the gate distance GD is correspondingly reduced and the 
maximum speed adjusted accordingly.

•

The antenna should be at least 50 cm (19.7”) from metal parts.

•

There should be no interference of the Reader from other electrical devices in the 
environment. The noise level difference should be less than 20 mV. 

•

The ID ISC.LR200-B Reader should be set to an RF power of 8 watts. 

•

When using ISO 15693 transponders, the Readers should be set 

Antenna, Master and Slave.

* Persistent deformation after load release approx. 0.5 cm (.2”).

Mechanical Data

Housing

UV stabilized ABS

Dimensions (W x H x D)

760 x 1700 x 80 mm 

± 

5mm

 

(300” x 670” x 31.5”) 

± 

2” 

Weight

• ID ISC.ANT1400/760-C

• ID ISC.ANT1400/760-B

approx. 35 kg (incl. Reader)

approx. 33 kg

Enclosure Rating

IP 54

Color

• Antenna Body

• Upper and lower covers

Metallic light gray

Slate gray similar to RAL7015

Mounting

• No. of attaching points

• Recommended anchors

• Recommended minimum load capacity of the 

floor fastener

4

∅ 

8  mm

5000 N / anchor

Maximum horizontal load on the top edge of 
the antenna

250 N*

Electrical Data****

Supply Voltage

12 - 24 V DC to the entire gate

7 - 12 V DC to the antenna board

Current Draw

max. 150 mA (DC)

Maximum transmitting power per antenna

10 W