Sony Corporation DWTB01N Manuel D’Utilisation

14

The transmitter can be attached to the user with the 
supplied soft case.
All operations are possible when the transmitter is attached 
with the soft case.
The clip can be attached to the soft case at an angle of 0, 
90, 180, or 270 degrees, allowing you to attach the 
transmitter in a variety of positions.

Remove the transmitter from the soft case before attaching 
or removing the supplied clip.

Remove the transmitter from the soft case.

Insert your fingers between the clip and the soft case 
as shown in the illustration and pull the clip in the 
direction of the arrow.

Press down on the clasp as shown in the illustration 
and slide the clip in the direction of the arrow.

Noise may occur if the antenna attachment areas come into 
contact with metallic objects.
Attaching the antenna tubes will prevent accidental contact 
of the antenna attachment areas with metallic objects.

 

Do not pull on the antennas when attaching or removing 
the antenna tubes. In addition, do not attach or remove the 
antenna tubes while holding the antennas. Doing so may 
damage the antennas.

Hold the unit by its body with the antennas attached.
Gently grasp the antenna tube, and slowly slide it onto the 
antenna all the way to the base of the antenna attachment 
area.

Hold the unit by its body with the antennas attached.
Gently grasp the antenna tube, and slowly slide it off the 
antenna from the base of the antenna attachment area.

Clasp