Maxon Telecom MX5010 Manuel D’Utilisation
MX-5010 User Manual
Version: 1.0 Date: 7th Jan, 2003
Page 11 of 44
You can turn the PIN code setting off and on with the SIM Settings. See “X-Ref” for
details.
The PIN code for your card is included in the materials supplied with the card .
details.
The PIN code for your card is included in the materials supplied with the card .
− Installing the Battery
Before you can start using your phone, you must install and charge the battery. The
battery should be fully charged before using the phone for the first time. Otherwise,
the service life of the battery may be reduced.
Only use the charger supplied with the phone to charge your phone. Using a different
charger could damage the phone.
battery should be fully charged before using the phone for the first time. Otherwise,
the service life of the battery may be reduced.
Only use the charger supplied with the phone to charge your phone. Using a different
charger could damage the phone.
• Remove the battery from its protective bag.
• Slide the battery into the connector at the back of the phone, then press the top
• Slide the battery into the connector at the back of the phone, then press the top
of the battery firmly into place.
− Charging the Battery
• Plug the charger into the charger connector at the base of the phone.
• Plug the other end of the charger into an electrical outlet.
• Plug the other end of the charger into an electrical outlet.
The battery begins to charge and the charging LED appears on the display.
• When the battery level indicator shows that the battery is fully charged,
disconnect the charger.
Notes
<TBD>
Cautions
<TBD>
<TBD>
Cautions
<TBD>
− Attaching the Wrist Strap
• Feed the tip of the strap through the wrist strap hole, then feed the strap
through the loop.
• Pull the strap to make sure the strap is secure.
o Turning Your Phone On and Off
After turning on your phone and checking that you can connect to the network, you
should take the time to personalize the settings to your needs.
To set the data and time for the phone, see “” on page X.
To change the PIN codes from their default settings, see “” on page X.
To change the language for the phone, see “” on page X.
should take the time to personalize the settings to your needs.
To set the data and time for the phone, see “” on page X.
To change the PIN codes from their default settings, see “” on page X.
To change the language for the phone, see “” on page X.
− Turning the Phone On
• Press and hold the <END/PWR> key to turn on your phone.
The phone comes on and then the name of the service network is displayed.
If the “PIN” Message Appears
The SIM card may be protected with a PIN code to prevent unauthorized use of the
phone. If this is the case, the message “PIN” will appear on the display.
To enter the PIN and use the phone:
The SIM card may be protected with a PIN code to prevent unauthorized use of the
phone. If this is the case, the message “PIN” will appear on the display.
To enter the PIN and use the phone: