Haoku technology development co. Ltd BE3 Manuel D’Utilisation
stereo wireless earphone
Instruction Manual
We are very glad that you purchased mini wireless earphone!
We hope it brings you fun and enjoy!
Safety Matters
Frequently asked questions
Technical specifications
※You should pay attention to the following matters when you
use this product:
※Charging and battery:
※Pairing mode:
※Turn off:
※Wireless pairing steps:
※Starting up:
※Disconnect the wireless connection between headset and
mobile phone: please use any of the following methods.
※Hanging up calls:
※Re-dialing calls:
※Rejecting calls:
※Answering calls:
※Reconnection of the paired headset to your mobile phone:
※Music playing/pausing:
※Volume adjustment and selection of song:
※Technical specifications:
※Explanatory drawing of headset
※Headset package contents:
Headset overview
In order to use this product correctly and safely, please read this manual in detail
before using, and save it properly.
1.Please control properly the volume and time of use this headset.
2.Do not use headset in the potential risk environment, to ensure safety.
3.Do not use this headset to listen a music, dial or answer calls during driving, to
avoid risk of distraction.
4.Please keep headset out of reach of children to avoid the risk caused by the
improper use by children.
5.Avoid the water to flow into the headset at the time of washing, it can be reason of
damage of headset or headset sound quality.
6.Continuously increase of volume should be avoided, because you cannot hear the
sound all around. If the tinnitus occurred or the sound volume is increased too high,
please adjust sound to suitable volume.
7.If you feel obvious discomfor t, excitement or other adverse reaction when using
this headset, please immediately stop using it.
8.Do not place or use this headset at the environment where the temperature is
lower than -15℃(5 F) or higher than 55℃(131 F). Otherwise, the service life of
the headset or battery will be shor ten.
2.Inser t USB charging cable into the headset charging interface, and inser t another
end of USB charging cable into USB charger or other charging unit. At this point, the
headset is charging. The red light of the headset is permanently lighted while
charging.
3.The time of the full charge of headset is about two hours. After fully charged, the
red light of the headset is turned off.
Warning
1.You must use matched charging cable to charge headset. If you use unmatched
charging cable, it is able to damage the headset; DC voltage must be 5V and the
electric current must be more than 100mA (5V/100mA).
2.This headset has built-in, non-removable, rechargeable battery. Do not try to take
out the battery from headset, to avoid damaging of the headset.
Ɣ
Long press multifunction key until the blue light is lighted and the headset beeps.
Ɣ
Long press multifunction key until red and blue lights flash alternately and the
headset will beeps.
Ɣ
Long press multifunction key until red light is turned off after it is lighted, and
headset will beep.
1.Please keep the distance between wireless headset and mobile phone (or other
connection units) within one meter, as close as possible.
2.Turn on the headset and enter into the pair mode, red and blue lights flash
alternately at this moment.
3.Turn on the wireless search function in mobile phone or unit required for other
connection; the mobile phone will display “HOCO ES5”.
Please firstly turn off headset before charging.
4.Select “HOCO ES5” (the “0000” needs to be inputted as pair password in the
mobile phone), the wireless headset will automatically connect with the mobile
phone, and blue light flashes. Note: the pair time of the wireless headset is at least
120 seconds. If the light is turned off, it means that the wireless pairing mode has
been stopped. If you have not paired successfully, please repeat step 1 to 4 for
pairing again.
Ɣ
Turn off the mobile phone wireless function.
Ɣ
Press headset multifunction key for a long time until red light is turn off, and the
headset will automatically turn off.
Ɣ
Ɣ
Move headset to the location where it is away from 20 meters of mobile phone
(about 60 feet) or fur ther.
Ɣ
When you hear warning sound from headset during call, continuously press
multifunction key for two times, the call will be rejected; or use your mobile phone
to reject call.
Ɣ
Continuously press multifunction key for two times in the standby mode, this will
automatically re-dial last telephone number.
Ɣ
Click headset multifunction key during call; or use the “hang up” key in your
mobile phone to hang up call.
Ɣ
When you hear warning sound from headset during call, click multifunction key to
answer call; or use your mobile phone to answer call.
1.Please keep the distance between wireless headset and mobile phone (or other
connection units) within one meter, as close as possible.
2.Turn on headset, and then the headset will enter into re-connection mode; at this
moment, the blue light flash.
3.Open the wireless search function in the mobile phone or devices required for
other connections at the same time, and the wireless headset will automatically
re-connect with the last connected mobile phone.
Ɣ
When playing music, click sound volume (+)/(-) to adjust the sound volume.
Long press sound volume (+)/(-) to select song.
1.Why HOCO ES5 cannot pair with mobile phone?
A: please check whether headset is in the pairing or reconnecting mode and check
whether the mobile phone wireless search function has been opened. Check
wireless menu in the mobile phone and delete/cancel headset, and re-connect the
headset in accordance with the user manual.
2.Why HOCO ES5 headset does not turn on?
A: please check the power level of the headset.
3.Can the battery of HOCO ES5 headset be replaced?
A: No, this headset has unremovable lithium-polymer battery.
4.Can HOCO ES5 headset be used during driving?
A: the communication headset may be used during driving. But, it is not
recommended to use headset during driving.
5.Can HOCO ES5 headset disconnect with mobile phone within 10 meters?
A: because the wireless is a wireless technology, thus the wireless technology is
very sensitive to objects between the headset and connected unit; please check
whether there are metals or other objects which may impact on the connection
within the connection scope.
6.After the headset connected to a computer or mobile phone,why there is no
sound?
A: please check whether the computer output sound track has been set as wireless
voice frequency device and whether the computer wireless technology suppor ts
A2DP protocol. Please check computer/mobile phone sound volume.
7.When wireless headset connected with the phone, can it be used for control
phone’s applications?
A: software functions of the apps in the different devices are vary, so some
application functions cannot be suppor ted by headset.
Ɣ
Click multifunction key to play or pause music.
Ɣ
Wireless version: Wireless 4.0
Ɣ
Wireless chip: CSR8645
Ɣ
Frequency: 2.4GHz
Ɣ
Working range: up to 10 meters (free space)
Ɣ
Stand-by time: more than 240 hours
Ɣ
Playing music time: more than 6 hours
Ɣ
Talk time: more than 5.5 hours
Ɣ
Charging time: about 2 hours
Ɣ
Suppor t protocol: A2DP, AVRCP, HSP, HFP
Ɣ
Frequency response: 20Hz-20kHz
Ɣ
ES5 wireless spor ts headset: One.
Ɣ
User manual: One.
Ɣ
Charging cable: One.
Ɣ
Storage box: One.
Ɣ
Headset cap: Two pairs.
Ɣ
Headset suppor t: One pair.
5
6
7
8
Long press Volume "+" and "-" at same time, then it will switch.
※Switch the notification tone:
MF button
Microphone
Vol(+)
Next Track
Vol(-)
Previous Track
Previous Track
USB Port
(
(
(
!" #$ %
%
%
&
%'
(
$
%
(
'
%
(
%
(
)
*+
%
)
, to o %
, to o %
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference,
and 2) this device must accept any interference received, including
interference that may cause undesired operation.
following two conditions: 1) this device may not cause harmful interference,
and 2) this device must accept any interference received, including
interference that may cause undesired operation.