TEKTELIC Communications T0004437 Manuel D’Utilisation
Pearl Gateway User Manual
T0004906
Version 1.4
TEKTELIC Communications Inc.
Confidential
Page 18 of 52
Figure 7: Pearl Fixed Gateway Module Mounting Points
2.5 Pearl TTU Mounting
The Pearl TTU module is designed to be mounted to a flat surface or to a pole using the
supplied mounting brackets. The TTU may be mounted with two of the small brackets as
illustrated in Figure 9 or with one small bracket and one antenna bracket as illustrated in Figure
10. Each bracket shall be attached to the TTU module using four of the supplied M5 x 0.8 –
10mm stainless steel screws at the locations illustrated in Figure 8. Once the brackets are
attached to the TTU module, the module may be mounted.
To mount the TTU with bracket to a flat surface, four site supplied stainless steel M8 bolts are
required, two at each end of each bracket as illustrated in Figure 8 and Figure 9. The M8 bolts
shall be selected according to the site specific mounting surface material and shall include
locking hardware.
supplied mounting brackets. The TTU may be mounted with two of the small brackets as
illustrated in Figure 9 or with one small bracket and one antenna bracket as illustrated in Figure
10. Each bracket shall be attached to the TTU module using four of the supplied M5 x 0.8 –
10mm stainless steel screws at the locations illustrated in Figure 8. Once the brackets are
attached to the TTU module, the module may be mounted.
To mount the TTU with bracket to a flat surface, four site supplied stainless steel M8 bolts are
required, two at each end of each bracket as illustrated in Figure 8 and Figure 9. The M8 bolts
shall be selected according to the site specific mounting surface material and shall include
locking hardware.