HENAN DIRK ELECTRONIC CO. LTD DK Manuel D’Utilisation
DK Operation Manual
(20170607)
9
B. The LED red light of transmitter flash slowly, you can control the receiver, if the battery power is insufficient,
please charge.
C. The transmitter presses the operation button, and the led light red all the time, LED is extinguished when
you released, the battery is seriously insufficient, can not transmit the signal to control the receiver, please
charge immediately, otherwise the lithium battery will be damaged.
D. Release emergency stop button of transmitter when the Led light red all the time , it is SPI problem, please
contact the dealer.
10. Appendix
10.1 How to named the model?
please charge.
C. The transmitter presses the operation button, and the led light red all the time, LED is extinguished when
you released, the battery is seriously insufficient, can not transmit the signal to control the receiver, please
charge immediately, otherwise the lithium battery will be damaged.
D. Release emergency stop button of transmitter when the Led light red all the time , it is SPI problem, please
contact the dealer.
10. Appendix
10.1 How to named the model?
10.2 Function button
10.2.1 Normal
When the button is pressed, the relevant relay is turned on and the relevant relay is not conducting when the
key is released.
10.2.2 Toggle
When the button press one time, then release, then the relevant relay device conduction, and then press again
and then release, then the relay does not turn on, this conduction is not conduction of the cycle action is Na
10.2.1 Normal
When the button is pressed, the relevant relay is turned on and the relevant relay is not conducting when the
key is released.
10.2.2 Toggle
When the button press one time, then release, then the relevant relay device conduction, and then press again
and then release, then the relay does not turn on, this conduction is not conduction of the cycle action is Na
10.2.3 Interlock
The control functions of a related two keys aren’t allowed to exist at the same time. For example, "up / down"
is not allowed to exist at the same time.
10.2.4 Non-interlocking
The control functions of a related two keys are allowed to exist at the same time. Such as individual control
without edge.
10.2.5 Rotary Switch
the corresponding relay contact is held on or off when the rotary switch is turned to the first position. A is
turned on. When the switch is reached, the corresponding relay contact is open or the corresponding mode.
10.3 Remote Radio Paring and Frequency changing
When remote radio paring or frequency changing, try to keep the transmitter near the receiver to ensure signal
strength. The receiver must re-power up, enter the setup mode within 5 seconds to perform remote radio paring
The control functions of a related two keys aren’t allowed to exist at the same time. For example, "up / down"
is not allowed to exist at the same time.
10.2.4 Non-interlocking
The control functions of a related two keys are allowed to exist at the same time. Such as individual control
without edge.
10.2.5 Rotary Switch
the corresponding relay contact is held on or off when the rotary switch is turned to the first position. A is
turned on. When the switch is reached, the corresponding relay contact is open or the corresponding mode.
10.3 Remote Radio Paring and Frequency changing
When remote radio paring or frequency changing, try to keep the transmitter near the receiver to ensure signal
strength. The receiver must re-power up, enter the setup mode within 5 seconds to perform remote radio paring