HENAN DIRK ELECTRONIC CO. LTD DK Manuel D’Utilisation
DK Operation Manual
(20170607)
10
or frequency changing
10.3.1 Remote Radio Paring
Remote radio pairing means that the transmitter and receiver enter the setup mode at the same time. The
receiver sets the function settings, ID and channel data to the transmitter and downloads it to the transmitter
to perform the matching work. This way avoid climb crane and
Increase safety and convenience.
The operation:
1. Entering setting mode must be operated within 5S after the receiver powers on again
2. Release emergency stop, turn on the open button to 0 file, press the "up" "down" key to enter the set
up mode.
3. After entering the set up mode, the Led indicate light flashes red and green quickly, then release “up”
and “down”
10.3.1 Remote Radio Paring
Remote radio pairing means that the transmitter and receiver enter the setup mode at the same time. The
receiver sets the function settings, ID and channel data to the transmitter and downloads it to the transmitter
to perform the matching work. This way avoid climb crane and
Increase safety and convenience.
The operation:
1. Entering setting mode must be operated within 5S after the receiver powers on again
2. Release emergency stop, turn on the open button to 0 file, press the "up" "down" key to enter the set
up mode.
3. After entering the set up mode, the Led indicate light flashes red and green quickly, then release “up”
and “down”
keys
4. Hold down the "down" button, until the red light alight turns green light flash slowly, the download
is successful.
Note: The receiver ID information is unique, in order to prevent wireless pairing abuse, remote radio pairing
can not change the receiver ID, just copy the data of the receiver ID to the transmitter; if you need to change
the receiver ID, only use the host computer or copier.
10.3.2 Frequency Changing
Frequency Changing means that the transmitter update the receiver channel by radio, the transmitter channel
are changing from 401-480 cycle in turn, Meantime, send the operating frequency to the receiver and update
the receiver operating channel.
The operation is as follows:
1. Entering setting mode must be operated within 5S after the receiver powers on again
2. Release emergency stop, turn on the open button to 0 file, press the "up" "down" key to wait for entering
the set up mode.
3. After entering the set up mode, the Led indicate light flashes red and green quickly, then release “up”
and “down”
is successful.
Note: The receiver ID information is unique, in order to prevent wireless pairing abuse, remote radio pairing
can not change the receiver ID, just copy the data of the receiver ID to the transmitter; if you need to change
the receiver ID, only use the host computer or copier.
10.3.2 Frequency Changing
Frequency Changing means that the transmitter update the receiver channel by radio, the transmitter channel
are changing from 401-480 cycle in turn, Meantime, send the operating frequency to the receiver and update
the receiver operating channel.
The operation is as follows:
1. Entering setting mode must be operated within 5S after the receiver powers on again
2. Release emergency stop, turn on the open button to 0 file, press the "up" "down" key to wait for entering
the set up mode.
3. After entering the set up mode, the Led indicate light flashes red and green quickly, then release “up”
and “down”
keys
4. Hold down the "down" button, until the red light alight turns green light flash slowly, the frequency
changing is successful.
5. If there is still interference with the same frequency, please repeat the above operation.
Note:CH3 are disabled channels (not for normal operation), if use for manual wireless frequency changing,
it will automatically skip the next channel;CH3(433.6175MHz) is public channel, used for manual wireless
frequency changing.
10.4 Other function
changing is successful.
5. If there is still interference with the same frequency, please repeat the above operation.
Note:CH3 are disabled channels (not for normal operation), if use for manual wireless frequency changing,
it will automatically skip the next channel;CH3(433.6175MHz) is public channel, used for manual wireless
frequency changing.
10.4 Other function
10.4.2 Channel