Taiyo Co. Ltd. A40827 Manuel D’Utilisation

(1) To install the antenna, screw it into the transmitter body. To reduce the antenna length, push in the lowest segment first, then the

next, etc. This will prevent the antenna from being broken.

(1) Put the hook on the ribbon onto the tip of the antenna.

• This transmitter (charger) uses eight AA size alkaline batteries (included).

Ribbon color code:
(1) 26.995 MHz —— Brown
(2) 27.045 MHz —— Red

* The antenna is a screw-in type. If the antenna is loose, it may not work. Therefore, make sure it is tight.

Rotate the catches on the upper left and right to unlock
the cover. Then, remove the cover from the battery box.
To replace the battery box cover, reverse the procedure.

Eight LR6
As shown in the left, insert eight
LR6. Pay attention to the polarity 

and 

 of the batteries.

* When the batteries in the transmitter (charger) are low, the LED power indicator lamp will grow dim. The distance that the

transmitter can transmit will also be reduced, and the 4.8V Ni-MH battery pack will not be properly charged. Replace the
LR6 as soon as there is any sign that they are dying.

A408

6