SHENZHEN ECARE ELECTRONICS CO. LTD 91505-1 Manuel D’Utilisation

 

  The indoor temperature is shown after activation until the first outdoor temperature signal is received. The 

display will then change to the outdoor temperature reading.   

  Press the IN-OUT TEMP button to toggle between indoor and outdoor temperature. 
  To activate Auto Scroll mode, press and hold the IN-OUT TEMP button for 3-4 seconds. Double curved 

arrows will show at the top of the LCD readout and the unit will automatically toggle between indoor and 
outdoor temperatures. Press and hold the IN-OUT TEMP button for 3-4 seconds to de-activate Auto-Scroll 
mode. 

  The temperature trend arrow which is located directly above the temperature reading will indicate the trend 

of indoor and outdoor temperatures during the last three minutes. 

 
TEMPERATURE ALERT   

When either the indoor or outdoor temperature exceeds the upper or lower pre-set limits, the alarm will sound 
for five seconds. It will be accompanied by a flashing alert icon and flashing arrow to show that the temperature 
has reached the upper or lower limit. The audible alert will sound for five seconds every minute. 
 
Setting the Temperature Alert: 

  When setting the alert temperatures, the display will change in increments of 1.8°F or 1.0°C. 

  Press and hold the ALERT button until the alert icon, up arrow and IN icon are shown on the display and 

the alert temperature is flashing 

  Press + or - to set the desired indoor alert temperature upper limit 

  Press ALERT and the down arrow will be displayed. Press + or - to set the desired indoor alert temperature 

lower limit 

  Press ALERT and the up arrow and OUT icon will be displayed. Press + or - to set the desired outdoor alert 

temperature upper limit 

  Press ALERT and the down arrow will be displayed. Press + or - to set the desired outdoor alert temperature 

lower limit 

  Press ALERT to confirm the settings and exit the alert temperature setting mode.   
 
Activating the Temperature Alert: 

  After you have entered all your temperature alert limits press ALERT and the system will be activated.   

The alert icon will show on the display. 

 
De-activating the Temperature Alert: 

  Press the ALERT button when either the indoor or outdoor temperature has exceeded the limit. The audible 

alert will stop and the alert icon will stop flashing. The arrow icon will continue to flash to indicate the out 
of range condition. 

  The alert will sound again if the indoor or outdoor temperature falls back within the upper or lower limit and 

then exceeds the upper or lower limit again. 

  To turn off the alert permanently, press ALERT until the alert icon is no longer displayed. 

 
VIEWING CLOCK, CALENDAR, RAINFALL RATE AND TOTAL RAINFALL 

  Press the MODE button to toggle the main display between time, date, rainfall rate and total rainfall. 

  The rainfall reading is accumulative data since the last press of either the RESET or CLEAR button. To 

clear the rainfall reading, press the CLEAR button when the rainfall reading is shown on the display. 

 

RAIN FALL HISTORY 

This unit has a large capacity memory that can store and display: 

  Last hour rain fall 
  Last 24 hours total rain fall 
  Daily rain fall ( Up to last six days as well as current day) 
  Weekly rain fall ( Up to last six weeks as well as current week ) 
  Monthly rain fall ( Up to last six months as well as current month )