Peerless-AV ADS100-A252 Manuel D’Utilisation

ISSUED: 10-07-13   SHEET #: 180-9052-1

The amplifi er is fi xed 2 channel operation.  When Mono operation is used (by using a ADS100-RXM 
module, sold separately) the receiver syncs to only 1 channel/input at the transmitter. However 
both amplifi er speaker outputs will have mono output and can be used. Bridging for more power 
to one output is not possible.  The amplifi er is confi gured as Stereo or Mono by utilizing the proper 
RX module. The system is supplied with the ADS100-RXS with is the stereo 2 channel module. For 
Mono, the accessory part ADS100-RXM is utilized.  Simply plug the ADS100-RXM RX Module into 
the amplifi er instead of the ADS100-RXS.  The Sync process is the same with Mono as with Stereo 
modules. The only difference being, when the “Ch-Sel” button is pressed, it scrolls through transmitter 
inputs 1 at a time, not 2 at a time.

This system has the ability for multiple Receiver/Amplifi ers to be paired to the same transmitter 
inputs. I.E. pair four stereo amplifi ers to transmitter inputs 1 and 2.  The limit to maintain the highest 
QOS is two stereo or four mono signals per TX module. More can be done but the QOS will go down, 
however installation situation and environment might allow more to work. 

Once paired and set up per the installation requirements, the transmitter module, and receiver 
modules will remember their paired channels should the power be removed from part or all of the 
system. The power-on and re-sync takes about 1 second from when power is restored.