Bernecker&Rainer Industrie-Elektronik Ges.m.b.H 5E903029 Manuel D’Utilisation

Commissioning 

14

Data sheet V 1.00 5E9030.29

The transponder reads and writes MIFARE and ISO 15693 tags. The corresponding commands and parameters

are valid depending on the tag being used. When a tag comes within range of the antenna, the PiccSelect message

and serial number of the tag are output. When the tag is removed, the PiccRemove message and serial number

of the tag are output.

**********************************

********* SW_ResetSTART **********

** Mifare **

** B&R Automation ** 

** S/W Rev. 0.7 ** 

**ENTER 'helpme' for information** 

**********************************

PiccSelect: 3B7CF4E0

PiccRemove: 3B7CF4E0 

1. "Command syntax" command
2. The executed command in plain text
3. Response
read,a,ff ff ff ff ff ff,5
"read" command: Data in block 5 in HEX=00000000000000000000000000000000
"Error: <ErrorNumber> (error syntax)"
There is a difference between operating errors and RFID stack error messages. See section 

.