Tesla Motors Inc 1048598 Manuel D’Utilisation
If Model X is equipped with Driver Assistance
components (see
components (see
page 71), and you have purchased the optional
Autopilot Tech Package, you can use Auto
Lane Change to move Model X into an
adjacent lane without touching the steering
Autopilot Tech Package, you can use Auto
Lane Change to move Model X into an
adjacent lane without touching the steering
wheel (which would cancel Autosteer). When
both Traffic-Aware Cruise Control and
both Traffic-Aware Cruise Control and
Autosteer are active, Auto Lane Change
intelligently steers Model X into an adjacent
driving lane. Using the forward looking
camera, the radar sensor, and the ultrasonic
sensors, Autosteer detects lane markings and
the presence of other vehicles.
Auto Lane Change is designed for use on
highways and main roads with visible lane
Auto Lane Change is designed for use on
highways and main roads with visible lane
markings and under relatively predictable
circumstances in which minimal steering and
driver intervention is needed.
Warning: It is the driver's responsibility to
determine whether a lane change is safe
and appropriate. Auto Lane Change can
not detect oncoming traffic in the target
lane, especially fast moving vehicles from
the rear. Therefore, before initiating a lane
change, always check blind spots, lane
markings, and the surrounding roadway
determine whether a lane change is safe
and appropriate. Auto Lane Change can
not detect oncoming traffic in the target
lane, especially fast moving vehicles from
the rear. Therefore, before initiating a lane
change, always check blind spots, lane
markings, and the surrounding roadway
to confirm it is safe and appropriate to
move into the target lane.
Warning: Never depend on Auto Lane
Change to determine an appropriate
driving path. Drive attentively by
watching the road and traffic ahead of
you and monitoring the instrument panel
for warnings. Always be prepared to take
immediate action.
Change to determine an appropriate
driving path. Drive attentively by
watching the road and traffic ahead of
you and monitoring the instrument panel
for warnings. Always be prepared to take
immediate action.
Warning: Do not use Auto Lane Change
on city streets or on roads where traffic
conditions are constantly changing and
where bicycles and pedestrians are
present.
on city streets or on roads where traffic
conditions are constantly changing and
where bicycles and pedestrians are
present.
Warning: The performance of Auto Lane
Change depends on the forward looking
camera's ability to recognize lane
markings.
Change depends on the forward looking
camera's ability to recognize lane
markings.
Warning: Do not use Auto Lane Change
on winding roads with sharp curves, on
icy or slippery roads, or when weather
conditions (such as heavy rain, snow, fog,
etc.) may be obstructing the view from
the camera or sensors.
on winding roads with sharp curves, on
icy or slippery roads, or when weather
conditions (such as heavy rain, snow, fog,
etc.) may be obstructing the view from
the camera or sensors.
Operating Auto Lane Change
Before you can operate Auto Lane Change,
you must enable it by touching Controls >
you must enable it by touching Controls >
Settings > Driver Assistance > Auto Lane
Change > On.
Change > On.
Note: Before you can turn on Auto Lane
Change, you must turn on Autosteer (see
Change, you must turn on Autosteer (see
on page 79). Without Autosteer,
Auto Lane Change can not operate.
Note: Your chosen setting is retained until you
Note: Your chosen setting is retained until you
manually change it. It is also saved in your
driver profile.
To change lanes using Auto Lane Change:
To change lanes using Auto Lane Change:
•
Perform visual checks to make sure it is
safe and appropriate to move into the
target lane.
•
Engage the turn signal.
Auto Lane Change moves Model X into the
adjacent lane in the direction indicated by the
turn signal, provided the following conditions
are met:
•
•
The Auto Lane Change setting is turned
on.
•
The turn signal is engaged.
•
Autosteer is actively steering Model X.
•
The ultrasonic sensors detect no vehicle
or obstacles up to the center of the target
lane.
or obstacles up to the center of the target
lane.
•
The camera's view is not obstructed.
•
Lane Assist does not detect a vehicle in
the blind spot (see
the blind spot (see
85).
•
Midway through the lane change, Auto
Lane Change can detect the outside lane
marking of the target lane.
Lane Change can detect the outside lane
marking of the target lane.
•
Driving speed is at least 30 mph
(50 km/h) in situations where a vehicle is
not detected in front of Model X. If
following a vehicle ahead, Auto Lane
Change works at any speed.
(50 km/h) in situations where a vehicle is
not detected in front of Model X. If
following a vehicle ahead, Auto Lane
Change works at any speed.
As the lane change is in progress, Overtake
Acceleration is activated, allowing Model X to
accelerate closer to a vehicle in front (see
Acceleration is activated, allowing Model X to
accelerate closer to a vehicle in front (see
through the lane change, Auto Lane Change
must be able to detect the target lane's
outside lane marking. If this lane marking can
not be detected, both Auto Lane Change and
Autosteer will cancel.
must be able to detect the target lane's
outside lane marking. If this lane marking can
not be detected, both Auto Lane Change and
Autosteer will cancel.
Note: Auto Lane Change moves Model X one
lane at a time. Moving into an additional lane
requires you to engage the turn signal a
lane at a time. Moving into an additional lane
requires you to engage the turn signal a
Auto Lane Change
Driver Assistance
81