Grid Connect Inc. ESP32P001 Manuel D’Utilisation
GC-ESP32-PORT-N
Description:
Features:
The GC-ESP32-PORT is a family of embedded networking modules that allow the user to create a
customized modular solution for all of their networking requirements. The GC-ESP32-PORT
modules are all based on the powerful ESP32 processor. The ESP32 processor has all the
communication interfaces required to implement today’s wired and wireless standards; these in-
clude: Wi-Fi, BLE, Ethernet, UART (RS232, RS485), I2C, I2S, and SPI. Each module has different
communication hardware and software options that are available for use.
Communication Interfaces
•
Wi-Fi
•
BLE
•
RMii
•
SPI, I2S, I2C
•
I/O
•
UART (RS232, RS422, RS485)
Wi-Fi, BLE
Having a combination of BLE, and Wi-Fi on board makes the modules suitable for a
variety of wireless networks, allowing for both Wi-Fi based internet connections and local BLE
connections to a smart phone or tablet.
RMii
TBD
Processor
The ESP32 has two CPU cores that can be individually controlled and a clock frequency that is
adjustable from 80 MHz to 240 MHz. The ESP32 also has a sleep mode processor that allows for
sleep current of less than 5 µA, making it suitable for battery powered applications.
Software / Firmware
The GC-ESP-PORT component utilizes the free RTOS operating system (now owned by Amazon/
AWS) with LwIP and a built-in TLS 1.2 with hardware acceleration. It also offers secure, encrypted
over-the-air (OTA) updates so that the module firmware can be updated remotely without manual or
physical intervention. The AWS cloud extensions provide an application interface (API) for develop-
ers that want to implement cloud applications.
Grid Connect has made available for the GC-ESP32-PORT family different firmware and hardware
that allows the user to use for standard applications:
•
Serial tunneling between the UART and Wi-Fi
•
Serial tunneling between the UART and Ethernet
•
Bridging between Wi-Fi and Ethernet
•
Basic AWS cloud connection
•
Custom firmware available
If you wish to develop your own software/firmware there is a standard SDK with many options for
your application. The development environment for ESP32 is available on-line and is open source
and free.
•
Wi-Fi/BLE 4.2
•
Ethernet RMii
•
Serial
- UART for TTL, RS232,
RS422, RS485
- SPI, I2C, I2S
•
Embedded ESP32-D2WQ main processor
chip
•
2 MB SPI flash embedded
•
540 KB SRAM
•
2 CPU cores that can be
controlled individually
•
Adjustable clock frequency 80 MHz to 240
MHz
•
FCC/IC certified
1630 W. Diehl Road, Naperville, IL 60563
Phone: +1 (630) 245-1445
USA Toll Free: +1 (800) 975-4743
gridconnect.com
Grid Connect, Inc.
FCC ID: 2AFC3ESP32P001 Model: GC-ESP32-PORT-N
IC: 22503-ESP32P001
This device complies with Part 15 of the FCC Rules and
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference recieved, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’industrie
Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions
suivantes: (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit acceptar tout brouillage
radioélectrique subi, mȇme si le brouillage est suseptible
d’en compromette le fonctionnement.
Note: Changes or modifications not expressively approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.