Baicells Technologies Co. Ltd. BRU3510 Manuel D’Utilisation
21
GPS antenna feeder connector is N type.
2. Pass one end of GPS antenna feeder through the support tube, connect it to the N
type of GPS antenna, and then fasten the support tube on the GPS antenna.
3. Fix the support tube on the pole.
4. Fix the lower end of cable and support tube with ribbon or tape.
5. Fix cable on the pole, as shown in Figure 3-16.
Figure 3-16 GPS Pole Installation
6. To avoid the connector getting loose causing by cable waggle, fix the cable on pole.
The cable and the pole should be fixed reserving a certain margin (10 cm or more),
preventing cable shrink due to temperature reduction in winter, as shown in Figure