QSR Automations Inc. KP9000 Manuel D’Utilisation
KP-9000 Wireless Keypad: User’s Guide
6
that keypad if found (same as searching). If a
new keypad in pairing mode is found, a new
pairing (and connection) is established with that
keypad. Other keypads not in pairing mode are
ignored. In BLE terms, ‘Pairing’ means active
scanning for advertisements from any keypad,
but also accepting directed advertisements from
its paired keypad.
Troubleshooting
What Does This Light Mean?
Dongle
If the light is…
This means… What next…
Off
Unpaired
Pair with keypad.
*
Slow blinking
blue
Searching
Dongle will attempt to
reconnect.
Solid
blue
Connected
The device is ready to go!
Rapid blinking
blue
Pairing
Dongle is pairing with
keypad.
Keypad
If the light is…
This means… What next…
Off
Unpaired
Pair with dongle.
*
Blinking low-duty
amber
Searching
Keypad will attempt to
reconnect.
Blinking low-duty
green
Connected
The device is ready to go!
Rapid blinking
amber
Pairing
Keypad is pairing with
dongle.
*Manually Pairing the Devices
1. Insert dongle in the USB port of target controller.
2. Turn the controller on.
3. Hold the KP-9000 (prepared with batteries installed) so that the light is in the
2. Turn the controller on.
3. Hold the KP-9000 (prepared with batteries installed) so that the light is in the
upper left corner.
4. Press and hold both top left key and bottom right key simultaneously for 3
seconds.
5. The LED will quickly blink on and off in amber while it is trying to talk to the
dongle.
6. If it establishes the pairing with the dongle, the light will blink green briefly and
then remain quiet.