Avaya 100BASE-FX, LC, SFP AA1419074-E6 Manuel D’Utilisation

• 400 MHz-km at 850 nm

• 400 MHz-km at 1300 nm

50 μm (ISO/IEC OM3)

• 1500 MHz-km at 850 nm

(includes laser launch
bandwidth)

• 500 MHz-km at 1300 nm

(includes laser launch
bandwidth)

Up to 220 m

1.9 dB

In the table, FDDI denotes Fiber Distributed Data Interface, ISO denotes International
Standards Organization, IEC denotes International Electrotechnical Commission, and OFL
denotes Over Filled Launch.

The following table is based on the 802.3aq standard and specifies the measurement
conditions for each fiber type.

Optical launch for OM1 and
FDDI-grade fiber

• 30% within 5 μm radius

• 81% within 11 μm radius

Uses 62.5 μmmode
conditioning patch cord

Optical launch for OM2 and
50 μm 400/400 fiber

• 30% within 5 μm radius

• 81% within 11 μm radius

Uses 50 μmmode
conditioning patch cord

Optical launch for OM3 and
50 μm fiber

• 30% within 5 μm radius

• 81% within 11 μm radius

—

The 10GBASE-LX XFP provides 10 GbE or OC-192 service at a nominal wavelength of 1310
nm. This XFP can attain link lengths of up to 10 km.

The following table lists the transmitter and receiver specifications for the 10GBASE-LR/LW
XFP. The part number of this XFP is AA1403001-E5.

For more information about the 10GBASE-LX XFP, including test and measurement
information, see the IEEE 802.3ae standard.

XFP specifications

58     Installation — SFPs and XFPs

December 2010