HP A2Y15AV Manuel D’Utilisation
Datasheet, Volume 2
57
Processor Configuration Registers
2.5.14
DEVEN—Device Enable Register
This register allows for enabling/disabling of PCI devices and functions that are within
the processor package. The following table bit definitions describe the behavior of all
combinations of transactions to devices controlled by this register.
the processor package. The following table bit definitions describe the behavior of all
combinations of transactions to devices controlled by this register.
All the bits in this register are Intel TXT Lockable.
2
RO
0h
Reserved (RSVD)
1
RW-L
0b
Uncore
IGD VGA Disable (IVD)
0 = Enable. Device 2 (IGD) claims VGA memory and I/O cycles,
0 = Enable. Device 2 (IGD) claims VGA memory and I/O cycles,
the Sub-Class Code within Device 2 Class Code register is
00.
1 = Disable. Device 2 (IGD) does not claim VGA cycles (Memory
and I/O), and the Sub- Class Code field within Device 2
Function 0 Class Code register is 80.
BIOS Requirement: BIOS must not set this bit to 0 if the GMS
field (bits 7:3 of this register) pre-allocates no memory.
This bit MUST be set to 1 if Device 2 is disabled either using a
This bit MUST be set to 1 if Device 2 is disabled either using a
fuse or fuse override (CAPID0_A[IGD] = 1) or using a register
(DEVEN[3] = 0).
This register is locked by Intel TXT lock.
0 = Enable
1 = Disable
This register is locked by Intel TXT lock.
0 = Enable
1 = Disable
0
RW-KL
0b
Uncore
GGC Lock (GGCLCK)
When set to 1b, this bit will lock all bits in this register.
When set to 1b, this bit will lock all bits in this register.
B/D/F/Type:
0/0/0/PCI
Address Offset:
50–51h
Reset Value:
0028h
Access:
RW-L, RW-KL
Size:
16 bits
BIOS Optimal Default
00h
Bit
Access
Reset
Value
RST/
PWR
Description
B/D/F/Type:
0/0/0/PCI
Address Offset:
54–57h
Reset Value:
0000209Fh
Access:
RW-L, RO, RW
Size:
32 bits
BIOS Optimal Default
000000h
Bit
Access
Reset
Value
RST/
PWR
Description
31:15
RO
0h
Reserved (RSVD)
14
RW
0b
Uncore
Chap Enable (D7EN)
0 = Bus 0 Device 7 is disabled and not visible.
1 = Bus 0 Device 7 is enabled and visible.
Non-production BIOS code should provide a setup option to
0 = Bus 0 Device 7 is disabled and not visible.
1 = Bus 0 Device 7 is enabled and visible.
Non-production BIOS code should provide a setup option to
enable Bus 0 Device 7. When enabled, Bus 0 Device 7 must be
initialized in accordance to standard PCI device initialization
procedures.
13
RW-L
1b
Uncore
PEG60 Enable (D6F0EN)
0 = Bus 0 Device 6 Function 0 is disabled and hidden.
1 = Bus 0 Device 6 Function 0 is enabled and visible.
This bit will be set to 0b and remain 0b if PEG60 capability is
0 = Bus 0 Device 6 Function 0 is disabled and hidden.
1 = Bus 0 Device 6 Function 0 is enabled and visible.
This bit will be set to 0b and remain 0b if PEG60 capability is
disabled.
12:8
RO
0h
Reserved (RSVD)