TP-LINK AC1750 Manuel D’Utilisation
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 40 -
Disable Security - If you do not want to use wireless security, check this radio button. But it’s
strongly recommended to choose one of the following modes to enable security.
strongly recommended to choose one of the following modes to enable security.
WPA/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared
passphrase. The router is configured by this security type by default.
passphrase. The router is configured by this security type by default.
•
Version
- you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is
Automatic, which can select
WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
capability and request.
•
Encryption
- When WPA-PSK or WPA is set as the Authentication Type, you can select
either
Automatic, or TKIP or AES as Encryption.
Note:
If you check the
WPA/WPA2-Personal
radio button and choose
TKIP encryption, you will
find a notice in red as shown in
Figure 4-21 WPA/WPA2 – Personal
•
PSK Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64
Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the router or can be found in Figure 4-16.
Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the router or can be found in Figure 4-16.
•
Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
should be 30 or above. Enter 0 to disable the update.
WPA/WPA2- Enterprise - It’s based on Radius Server.
•
Version
- you can choose the version of the WPA security on the drop-down list. The
default setting is
Automatic, which can select
WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
•
Encryption -
You can select either
Automatic, or TKIP or AES.
Note:
If you check the
WPA/WPA2-Enterprise radio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-22.