TP-LINK TL-WDR 4300 Manuel D’Utilisation
TL-WDR4300
N750 Wireless Dual Band Gigabit Router
- 76 -
Figure 4-68 Port Triggering
To add a new rule, follow the steps below.
1. Click the
Add New… button, the next screen will pop-up as shown in Figure 4-69.
2. Select a common application from the
Common Applications drop-down list, then the
Trigger Port field and the Incoming Ports field will be automatically filled. If the Common
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.
3. Select the protocol used for Trigger Port from the
Trigger Protocol drop-down list, either
TCP, UDP, or All.
4. Select the protocol used for Incoming Ports from the
Incoming Protocol drop-down list,
either
TCP or UDP, or All.
5. Select
Enable in Status field.
6. Click the
Save button to save the new rule.
Figure 4-69 Add or Modify a Triggering Entry
Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger
this rule.
this rule.