Cisco TRC5 CTS-RMT-TRC5= Manuel D’Utilisation
Codes de produits
CTS-RMT-TRC5=
14
Deployment Details
August 2012 Series
14
Step 15:
Restart the system in order for the new settings take effect
(required).
xCommand restart
For security reasons, you are advised to change the root pass-
word from the default of TANDBERG.
word from the default of TANDBERG.
Tech Tip
After the system restarts, log in as
root
to change the password for the root
account.
Step 16:
Log in again with the username
root
Step 17:
Enter the default root password
TANDBERG
Step 18:
After logging in, type the
passwd
command.
Step 19:
Enter the new password
[password]
Step 20:
When prompted, retype the password
[password]
Step 21:
Type the
exit
command. This logs you out of the root account.
Step 22:
Disconnect the serial cable and store it in a safe place.
Procedure 6
Configure a VCS cluster non–master peer
(Optional)
The following procedure is needed if you plan to use more than one VCS in
your environment. If you only have one VCS, please skip ahead to Procedure
7 “Configure VCS subzones”.
The following procedure is needed if you plan to use more than one VCS in
your environment. If you only have one VCS, please skip ahead to Procedure
7 “Configure VCS subzones”.
The rest of the configuration of the Cisco VCS is done using a standard web
browser. You use the information collected in Table 2 at the beginning of
Procedure 5 “Prepare a VCS cluster non-master platform” to fill in the fields.
browser. You use the information collected in Table 2 at the beginning of
Procedure 5 “Prepare a VCS cluster non-master platform” to fill in the fields.
Step 1:
Open a browser window, and enter the IP address of the non–mas-
ter Cisco VCS:
10.10.48.131
Step 2:
Select
Administrator login
, enter the following values, and then
click
Login
:
• Username—
admin
• Password—
[password]
Step 3:
Navigate to
System > System
, and in the
System name
box, enter
VCSc2
,
and
then
click
Save
.
Step 4:
Navigate to
System > DNS,
enter the following values, and then
click
Save
:
• Local host name—
VCSc2
• Domain name—
cisco.local
• DNS requests port range start—
1024
• DNS requests port range end—
65535
• Address 1—
10.4.48.10