Cisco TRC5 CTS-RMT-TRC5= 用户手册

14

Deployment Details

August 2012 Series

14

Step 15:  

Restart the system in order for the new settings take effect 

(required). 

For security reasons, you are advised to change the root pass-
word from the default of TANDBERG.

After the system restarts, log in as 

root

 to change the password for the root 

account.

Step 16:  

Log in again with the username 

root

Step 17:  

Enter the default root password 

TANDBERG

Step 18:  

After logging in, type the 

passwd

 command.

Step 19:  

Enter the new password 

[password]

Step 20:  

When prompted, retype the password 

[password]

Step 21:  

Type the 

exit

command. This logs you out of the root account.

Step 22:  

Disconnect the serial cable and store it in a safe place.

Procedure 6 

Configure a VCS cluster non–master peer 

(Optional)
The following procedure is needed if you plan to use more than one VCS in 
your environment. If you only have one VCS, please skip ahead to Procedure 
7 “Configure VCS subzones”.

The rest of the configuration of the Cisco VCS is done using a standard web 
browser. You use the information collected in Table 2 at the beginning of 
Procedure 5 “Prepare a VCS cluster non-master platform” to fill in the fields. 

Step 1:  

Open a browser window, and enter the IP address of the non–mas-

ter Cisco VCS: 

10.10.48.131

Step 2:  

Select 

Administrator login

, enter the following values, and then 

click

Login

:

•  Username—

admin

•  Password—

[password]

Step 3:  

Navigate to 

System > System

, and in the 

System name

 box, enter 

VCSc2

,

and

then

click

Save

.

Step 4:  

Navigate to 

System > DNS,

enter the following values, and then 

click 

Save

:

•  Local host name—

VCSc2

•  Domain name—

cisco.local

•  DNS requests port range start—

1024

•  DNS requests port range end—

65535

•  Address 1—

10.4.48.10