ECS TIGD-CI4 (V1.1) Manuel D’Utilisation

29

Using BIOS

This page sets up some parameters for peripheral devices connected to the system.

CMOS Setup Utility - Copyright  (C)  1985-2009, American Megatrends, Inc.

                      Integrated Peripherals

SATA Configuration

IDE

Onboard SATA Mode

Compatible

Onboard AUDIO Function

Enabled

Onboard LAN Function

Enabled

Onboard LAN Boot ROM

Disabled

Serial Port1 Address

3F8/IRQ4

Parallel Port Address

3F8

  Parallel Port Mode

ECP

    ECP Mode DMA Channel

DMA3

  Parallel Port IRQ

IRQ7

USB Functions

Enabled

Legacy USB Support

Enabled

IDE
AHCI
Disabled

    Help Item

SATA Configuration (IDE)
Use this item to show the Serial ATA Configuration options: IDE,AHCI,Disabled.

Use this item to enable or disable the onboard audio device.

Use this item to enable or disable the onboard LAN function.

Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.

Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.

: Move

F10: Save     ESC: Exit

Enter : Select

+/-/: Value

F9: Load Default Settings

F1: General Help

Options

Use this item to set SATA mode  (not disable )

Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a
portaddress.

Parallel Port Mode (ECP)
Use this item to select the parallel port mode. You can select Normal
(StandardParallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel
Port), orBPP (Bi-Directional Parallel Port).

ECP Mode DMA Channel (DMA3)
Use this item to assign a DMA channel to the parallel port.

Parallel Port IRQ (IRQ7)
Use this item to assign IRQ to the parallel port.