Gigaset DX800A S30853-H3100-D201 Manuel D’Utilisation
Codes de produits
S30853-H3100-D201
103
Operating the base's answering machine
Gigaset DX800A all in one / IM-NORD EN / A31008-N3100-R201-2-SM19 / answering_m.fm / 18.04.11
V
e
rsion 4, 16.0
9
.2005
Please note:
You can configure your telephone so that
the first ringer is suppressed on all calls
the first ringer is suppressed on all calls
. This means that the time set for
the ring delay predetermines how long the
caller must wait before the answering
machine accepts the call (not how long it
rings).
caller must wait before the answering
machine accepts the call (not how long it
rings).
Changing the language for the
voice prompt and default
announcement
voice prompt and default
announcement
v
Open the main menu.
*#Q5#2
Enter digits and press
Q
§OK§
To set Swedish.
§OK§
To set Danish.
2
§OK§
To set Norwegian.
3
§OK§
To set English.
Operating when on the move
(remote operation)
(remote operation)
You can check and activate your answering
machine from any other telephone (hotel,
pay phone etc.).
machine from any other telephone (hotel,
pay phone etc.).
Prerequisites:
u
You have set a system PIN other than
0000
0000
u
The phone you are using for remote oper-
ation has tone dialling (DTMF) i.e., you
hear different tones when you press the
keys. Alternatively, you can use a code
transmitter (available from retailers).
ation has tone dialling (DTMF) i.e., you
hear different tones when you press the
keys. Alternatively, you can use a code
transmitter (available from retailers).
u
The connection/MSN via which you call is
assigned to the answering machine as a
receive connection.
assigned to the answering machine as a
receive connection.
Calling the answering machine and
playing messages
playing messages
~
Dial your own number.
9 ~
When you hear your announce-
ment: Press
ment: Press
9.
The announcement is aborted.
~
Enter system PIN.
You are informed whether any new mes-
sages have been recorded. The messages are
now played back. You can now operate the
answering machine with the keypad.
sages have been recorded. The messages are
now played back. You can now operate the
answering machine with the keypad.
The following keys are used for operation:
A
A
During time stamp playback:
Skip to previous message.
During message playback:
Skip to the start of the current
message.
Skip to previous message.
During message playback:
Skip to the start of the current
message.
B
Stop playback. Press again to
resume.
After a pause of approx. 60 sec-
onds, the connection is ended.
resume.
After a pause of approx. 60 sec-
onds, the connection is ended.
3
Go to the next message.
D
Repeat the last five seconds of
the message.
the message.
0 During
message
playback:
Delete current message.
:
Change the status of a previ-
ously played back message to
"new".
The next message starts to play.
The remaining memory is
announced at the end of the last
message.
ously played back message to
"new".
The next message starts to play.
The remaining memory is
announced at the end of the last
message.
Please note
Remote operation via VoIP connections
is possible as long as DTMF signals are
transmitted (depending on the provider)
as SIP info messages, audible signals in
the voice channel (inband or audio) or as
special RTP data packets (pursuant to
RFC2833).
is possible as long as DTMF signals are
transmitted (depending on the provider)
as SIP info messages, audible signals in
the voice channel (inband or audio) or as
special RTP data packets (pursuant to
RFC2833).