Conrad Energy 9 V / PP3 battery (rechargeable) NiMH NIMH 9V BLOCK 200 mAh 8.4 V 1 pc(s) 251055 Fiche De Données

Codes de produits

251055

CHARACTERISTICS

Unless special stated, tests should be carried out within one month of delivery.

Ambient conditions:

Ambient Temperature: 20±5℃

Relative Humidity: 65±20%RH

Notes:1）Standard charge/discharge

Charge: 20 mA (0.1It)×16 hr

Discharge: 40 mA (0.2It) to 7.0V

2）Except special explaining, the battery shall not leakage and PVC shall not breakage during the test.

Test Items

Test Conditions

Requirements

Remark

Capacity

Standard Charge and Discharge

Discharge Capacity:
≥

200 mAh

Up to three cycles are
allowed

Open-circuit

Voltage (OCV)

Voltage between the battery terminals
shall be measured within 1 hour after
standard charge

≥

8.75V

High-rate

discharge(1It)

After standard charge, rest for 1 hour
before discharge to 7.0V at 200 mA
current

≥

50 minutes

Up to three cycles are
allowed

Internal

impedance(Ri)

Upon fully charge (1KHZ)

≤1200mΩ/pack

IEC cycle life

IEC61951-2/2003 7.4.1.1(See Remark 1) ≥500 cycles

Standard charged ,stored for 180days
below 20℃, then standard discharge to
7.0V

Discharge Capacity:
≥

85%original capacity★

Self- discharge

Standard charged ,stored for 360days
below 20℃, then standard discharge to
7.0V

Discharge Capacity:
≥

80%original capacity★

Over-charge

Charge at 20 mA (0.1 It) for 1 year.

No leakage, nor disrupt, nor
burst.

Over- discharge

(1) Standard charge and discharge for

3cycles ,

(2) Conducted with constant load

resistor 210Ωfor 3days

(3) Then standard charge and

discharge

Discharge Capacity:
≥80% original capacity

Up to three cycles are
allowed

Vibration

resistance

Standard charge. Then leave for 24
hours, check cell before

/ after vibration.

Ampliture: 1.5 mm
Vibration: 3000 CPM

Change of voltage

V＜0.02V/ cell

Change of internal impedance

R＜5 mΩ/ cell

Any direction for 30
minutes