Beha Amprobe AT-5000 Underground Wire Tracer 3434903 Manuel D’Utilisation
Codes de produits
3434903
8
The equipment and all accessories must be connected according to applicable standards VDE, EN or DIN as well as country-
specific regulations.
specific regulations.
UNPACkING ANd INSPECTIoN
Your shipping carton should include:
Your shipping carton should include:
1 x R-5000 Receiver
1 x T-5000 Transmitter
1 x CK-5000 Test leads and Ground Stake
1 x Instruction Manual
1 x Carrying case Nylon Bag
1 x T-5000 Transmitter
1 x CK-5000 Test leads and Ground Stake
1 x Instruction Manual
1 x Carrying case Nylon Bag
T-5000 TRANSMITTER SySTEM oVERVIEW
Controls
Control
description
Power oN – Push to turn the transmitter ON or OFF. An amber LED illuminates when the transmitter
is ON.
is ON.
Circuit Condition – Available only in direct connection mode. Push to toggle through and view the
actual condition of the circuit in volts, milliamps, watts, and ohms.
actual condition of the circuit in volts, milliamps, watts, and ohms.
output Level – Push to change the output level. Push repeatedly or use the left/right navigational
button to increases or decrease the output level.
button to increases or decrease the output level.
Signal Select – Push to turn Signal Select ON or OFF for positive line identification.
frequency Select – Push to toggle through the active frequencies.
Sheath fault Locate (SfL) – Push to turn the SFL feature ON or OFF. A red LED illuminates when the
feature is ON.
feature is ON.
4-Way Navigation Control – Push to select and navigate through the operational menu screens
and active frequency menu.
and active frequency menu.