Beha Amprobe AT-5000 Underground Wire Tracer 3434903 Manuel D’Utilisation
Codes de produits
3434903
15
Push
•
Select to activate the desired setting. The transmitter automatically returns to the operational display screen.
My Preset State Menu
The T-5000 My Preset State allows the operator to return the transmitter’s operational conditions to the configured and saved
preset state by selecting – No or yes.
The My Preset State feature is configured using the three-button navigational keypad.
The T-5000 My Preset State allows the operator to return the transmitter’s operational conditions to the configured and saved
preset state by selecting – No or yes.
The My Preset State feature is configured using the three-button navigational keypad.
Push the left/right arrows to select the desired setting.
•
Push Select to activate the desired setting. The transmitter automatically returns to the operational display screen.
•
About T-5000 Menu
The About T-5000 menu allows the operator to view the transmitter’s serial number, hardware, and firmware information.
The About T-5000 menu allows the operator to view the transmitter’s serial number, hardware, and firmware information.
Push Menu to return to the previous screen.
•
Sheath fault Locating (SfL) optional Accessory A-5000
The Sheath Fault Locating (SFL) feature is available in Direct (Conductive) Connection mode only.
The Sheath Fault Locating (SFL) feature is available in Direct (Conductive) Connection mode only.
Push the SFL button,
•
, to activate operation.
Frequency selection is not configurable through the frequency menu screen.
Frequency selection: 9.82 kHz or 82 kHz, is activated by pressing the frequency button,
Frequency selection: 9.82 kHz or 82 kHz, is activated by pressing the frequency button,
.
The active frequency is displayed on the operational display screen.