AVM 3370 20002563 Manuel D’Utilisation

Codes de produits
20002563
Page de 144
Configuring the Internet Connection for the Mobile Communications Network
FRITZ!Box 3370
33
7.3
Configuring the Internet Connection for the Mobile 
Communications Network
With a USB modem you can also establish the Internet con-
nection with your FRITZ!Box 3370 via the mobile communica-
tions network. A USB modem for mobile Internet access 
(UMTS/HSPA) and a SIM card from a mobile communications 
provider are required for this. The FRITZ!Box supports 
UMTS/HSPA modems from various manufacturers.
1.
Insert the USB modem in the USB port on the FRITZ!Box.
2.
Open the FRITZ!Box user interface (see 
).
In the “Internet” menu, the sub-menu “Mobile Tele-
phone Network” is displayed.
3.
Select the setting “Mobile connection enabled”.
4.
Configure the settings for your Internet connection over 
the mobile communications network. For more informa-
tion, see the Online Help of the FRITZ!Box.
When the mobile communications function is used, the 
FRITZ!Box user interface presents information about network 
availability, connection status and throughput.
After this function has been set up, the “Internet / Mobile 
Telephone Network” menu is always available, even when the 
USB modem has been disconnected.
The “Mobile Telephone Network” menu is not available 
until the UMTS/HSPA modem has been connected to the 
USB port of the FRITZ!Box.
Due to technical limitations on the part of the mobile com-
munications network providers, some limitations may arise 
for Internet telephone calls and for applications requiring an 
incoming connection. The same is true for using port for-
warding, sharing USB storage memory, remote access via 
HTTPS, dynamic DNS and VPN. Contact your network provider 
for details on any restrictions that may apply.