Lecroy WAVEACE 1012 2-channel oscilloscope, Digital Storage oscilloscope, WaveAce 1012 Manuel D’Utilisation
Codes de produits
WaveAce 1012
Operator's Manual
98
WA1K2K-OM-E RevB
2. Press the Interval option button and use the Adjust Front Panel
(on page 10) knob to dial in the desired interval between record
frames.
frames.
3. Press the End Frame option button and use the Adjust front panel
knob to dial in the desired number of record frames.
4. Press the Operate option button to Start/Stop recording.
Note
: A
record: 1
counter is shown on the upper-left part of the grid
display area which counts the number of record frames to your set
End
Frame
amount. After pressing the Operate option button, once the
End Frame amount is reached, a
Record Wave Success
notification is
then briefly shown on the lower-center part of the grid display area.
The Record Menu (with Mode Set to Play Back) - Page 1/2
Press the Mode option button and select Play Back. The Record menu
(with Mode set to Play Back) - Page 1/2 is shown and contains the
following option button controls (in addition to Mode).
(with Mode set to Play Back) - Page 1/2 is shown and contains the
following option button controls (in addition to Mode).
1. Press the Operate option button to Start/Stop playback.
Note
: A
play: 1
counter is shown on the upper-left part of the grid
display area which counts the number of record frames to your
recorded
recorded
End Frame
option button control (set on PlayBack Page 2/2)
amount. If your play mode is set to Circular (repeat) the counter
continually cycles. Otherwise, if using the Single Time play mode, the
counter reaches the end frame amount and stops.
continually cycles. Otherwise, if using the Single Time play mode, the
counter reaches the end frame amount and stops.