Gw Instek GPT-9603 Insulation measuring device, GPT-9603 Manuel D’Utilisation
Codes de produits
GPT-9603
FAQ
67
If “Interlock” is enabled, the interlock key must be inserted into the
signal I/O port on the rear panel before a test can be started. See
page 65 for details.
Lastly, ensure that the Start Ctrl setting is correctly configured in
the Common Utility menu. For example, to enable the START
button to start a test, ensure that the Start Ctrl setting is set to
FRONT PANEL. See page 56 for details.
signal I/O port on the rear panel before a test can be started. See
page 65 for details.
Lastly, ensure that the Start Ctrl setting is correctly configured in
the Common Utility menu. For example, to enable the START
button to start a test, ensure that the Start Ctrl setting is set to
FRONT PANEL. See page 56 for details.
The accuracy does not match the specification.
Make sure the tester is powered on for at least 30 minutes, within
+15°C~+35°C. This is necessary to stabilize the unit to match the
specification.
+15°C~+35°C. This is necessary to stabilize the unit to match the
specification.
For more information, contact your local dealer or GWInstek at
www.gwinstek.com / marketing@goodwill.com.tw.
www.gwinstek.com / marketing@goodwill.com.tw.