Entes MPR-63 Mains-analysis device, Mains analyser MPR-63 Manuel D’Utilisation
Codes de produits
MPR-63
28
Warning :
You may quit all settings any time by key.
You must record any change in the settings by menu key.
Figure 35:
Latch function type operation.
In order to reset input registers, which are set in latch function,
“0” bit has to be written in I/0 status register.
In order to configure
Input-1
function, in
0165 H
register:
- “0” has to be entered for Real Time and
- “1” has to be entered for Latch.
Figure 34:
Real Time function operation
In order to configure
Input-2
function, in
0166 H
register:
- “0” has to be entered for Real Time and
- “1” has to be entered for Latch.
Input 1 and Input 2 register bits show inputs status.
0
Relay1
1
2
3
Relay2
4
5
6
7
8
9
10
11
12
13
14
15
0
0
0
0
0
0
0
0
0
0
0
0
Input1
Input2
Addres: 004C H
Device has 2 digital inputs. User can monitor the applied voltage to the input on the LCD display.
Figure 33:
Setting the function value
3.Input-1 / 4.Input-2
Input: 5-24V DC
max. 30V DC
min. 50 msec.
Time
I/0 Status Register
1
Time
0
3.Input-1 / 4.Input-2
Bits
3.Input-1 / 4.Input-2
Input: 5-24V DC
max. 30V DC
min. 50 msec.
Time
I/0 Status Register
1
Time
0
Write “0” to I/O Status Register Bit
3.Input-1 / 4.Input-2
Bits
4.8 Digital Inputs (3. Input-1 / 4. Input-2)
(Only for MPR63
-22/42
)