Beha Amprobe GT-800 STD KITVDE-tester 4472062 Manuel D’Utilisation
Codes de produits
4472062
GT-600/GT-800 Instruction Manual
47
MEMORY Menu
In this menu the following selections are available:
SAVE TO USB:
SAVE TO USB:
Transfer of stored data to USB memory stick. The whole
storage (TOTAL), individual clients (CLI), individual
appliances (APP) or only individual measurement results
(0001) can be transferred. Data records to be transferred
can be selected by using the “
◄”, “►” and “▼” menu
keys, transfer action must be confirmed by pressing the
“
” menu key.
USB memory stick shall be connected to USB interface
USB2. Three sound signals will follow after plugging it to
USB2 connector as a confirmation the memory stick is
recognized by the GT-600/GT-800 Tester.
USB2. Three sound signals will follow after plugging it to
USB2 connector as a confirmation the memory stick is
recognized by the GT-600/GT-800 Tester.
Note! The USB memory stick has to be FAT12, FAT16 or FAT32 formatted, sector
size 512 Byte.
size 512 Byte.
CLEAR MEMORY:
Erasing of measurement results. The whole memory
(TOTAL),
individual
clients
(CLI), individual appliances
(APP) or only individual measurement results (0001) can
be erased. Data records to be erased can be selected by
using
the
“
◄”, “►” and “▼” menu keys, the clear action
must be confirmed by pressing the “
” menu key.
There is another possibility to clear only results under
selected address or to clear the results including selected
address.
MEMORY PROPERTY: Number of occupied/total available memory locations
(LOCATIONS), number of stored results (RESULTS) and
number of entered appliances / total available number of
appliances (200) (APPLIANCES) is displayed.
The results are written in a file that can be read by the optional software es
control.
OPERATOR Menu
Modify or enter the operator’s name by using the “
▼”, “▲” and “
” menu
keys then confirm it by pressing the “
” menu key.
The operator can also be entered by using the optional barcode reader.
The operator and the date are attached to each measurement result
automatically when storing test results.