Fluke 805 VIBRATION METER 4094385 Manuel D’Utilisation
Codes de produits
4094385
Vibration Meter
How to Operate
15
External Sensor
In addition to the integrated vibration sensor, an optional
external sensor connects to the Meter. The connector type
for the external sensor is a Subminiature version B (SMB).
Figure 3 shows how to connect an external sensor to the
Meter.
external sensor connects to the Meter. The connector type
for the external sensor is a Subminiature version B (SMB).
Figure 3 shows how to connect an external sensor to the
Meter.
Note
Fluke supports, but does not provide, external
sensors.
sensors.
gqi05.eps
Figure 3. External Sensor Connection
Note
High frequency measurement (Crest Factor+) and
Temperature measurement automatically turn off
when an external sensor is connected to the
Meter.
Temperature measurement automatically turn off
when an external sensor is connected to the
Meter.
To connect:
1. Open the connector cover and push the external
sensor into position.
After you connect the external sensor, a pop-up
message opens on the Meter display and then
opens the Enter Sensitivity menu.
message opens on the Meter display and then
opens the Enter Sensitivity menu.
gqi14.eps
Note
The sensitivity must be set in mV/g units.
2. Push
2. Push
6 and 7 to select a character in the menu.