IVT 900012 - 6A Automatic Lead Acid Battery Charger Station, For 12V Batteries 900012 Fascicule

                                                       

 
 

Dear Customer, 
Thank you for buying our product. You have bought one of the most powerful and reliable Automatic 
Charger of its class. 
Please read the operating instructions carefully before use. 
 
 

- 

- 

The switch (3) on the rear does not disconnect all poles from the mains. For this reason the mains 
plug of the device must be accessible during operation. 

- 

The air vents must not be obstructed during operation. 

- 

No liquid of any kind may be allowed penetrate the device. 

- 

The device may only be cleaned with a dry cloth. 

- 

The device may only be connected to 230V/50/60Hz. 

- 

Under no circumstances should the device be used under adverse ambient conditions. Adverse 
ambient conditions are: ambient temperatures over 50°C, flammable gases, solvents, vapours, dust, 
relative humidity over 80% and moisture. 

- 

The device may only be operated in dry, indoor conditions.  

- 

If there is reason to believe that safe operation is no longer possible, the device must be shut down 
immediately and secured against unintentional operation. There is reason to believe that safe 
operation is no longer possible if the device is not functioning or is visibly damaged, if the mains line 
is damaged, in the case of transport damage and after storage in unfavourable conditions . 

- 

Service and repair 

      Service work and repairs may only be carried out by authorised personnel. Only spare parts with the 

specified values may be used.  

 
Warning!  The Charger operates on the constant charging voltage principle. Before recharging make sure 
that: 
- 

the rechargeable batteries are constant charging voltage compatible. 

- 

the rechargeable batteries have a max. charging current 6A. 

The best results are achieved by using acid and sealed Lead acid batteries. 
Warning!  Strictly follow the manufactures instructions on recharging. 
 
 

The Charger delivers a stable DC voltage of 13,8 V and a current of 6 A. The switching frequency is 
approx. 70kHz and allows the use of smaller components. The Charger is fitted with a switch mode power 
supply and operates without a transformer, thus enabling a weight reduction of approx. 70% compared to 
normal chargers. 
 
 

The Charger operates on the constant charging voltage principle. As soon as the end-of-charge voltage 
of 13,8 V is reached, the device shuts down. As soon as the battery voltage drops below 13,8 V, the 
battery is automatically recharged. This ensures that the battery is always full and a long battery life.

 

Use only: 
- 

Rechargeable batteries that are constant charging voltage compatible. 

- 

Rechargeable batteries that have a max. output current 6 A. 

Warning!  Follow the battery manufacturers instructions carefully.