IVT 900012 - 6A Automatic Lead Acid Battery Charger Station, For 12V Batteries 900012 Fascicule
Codes de produits
900012
Equipment and control elements
1. Charging cable
2. Connection + - via charging cable
3. LED operating voltage
4. LED charge level indicator
5. On/Off switch
6. Mains cable 230V~
Connection and Use
Check the Charger and wiring for visible damage before putting into use. Plug into the mains socket. As
soon as the device is connected, the red LED lights up.
soon as the device is connected, the red LED lights up.
Recharging
As soon as the battery is connected, the green LED charge level indicator lights up. When the end-of-
charge voltage is reached, the green LED goes out. As soon as the battery voltage drops below 13,8 V,
the battery is automatically recharged. This ensures that the battery is always full and a long battery life.
Note: The device can remain connected to the battery.
charge voltage is reached, the green LED goes out. As soon as the battery voltage drops below 13,8 V,
the battery is automatically recharged. This ensures that the battery is always full and a long battery life.
Note: The device can remain connected to the battery.
Charger fails to function – possible reasons.
Check whether LED signal lamp illuminates.
Warning! Unplug from mains socket before removing fuse holder. Use fuses of the same type. The use
of repaired fuses or jumping the fuse-holder is dangerous and to be avoided. Service and repairs are to
be made by authorized Personnel only.
Warning! Unplug from mains socket before removing fuse holder. Use fuses of the same type. The use
of repaired fuses or jumping the fuse-holder is dangerous and to be avoided. Service and repairs are to
be made by authorized Personnel only.
Specifications
Input Voltage:
Power on:
Output Voltage:
Output and charging current:
Efficiency:
Short-circuit protection:
Safety Standard:
Insulation Voltage:
Interference Suppression:
Measurements:
Weight:
Delivered:
Power on:
Output Voltage:
Output and charging current:
Efficiency:
Short-circuit protection:
Safety Standard:
Insulation Voltage:
Interference Suppression:
Measurements:
Weight:
Delivered:
230 V +/-6 % 50/60 Hz
max. 50 A
13,8 V +/-5 %
6 A continuous
approx. 85 %
Pulsing cut-out
EN 60335
4,1 kVeff 50 Hz/1 Min.
EN/CE Standard
158 x 110 x 40 mm
650 g
Charger, charging-cable, mains cable and instructions
max. 50 A
13,8 V +/-5 %
6 A continuous
approx. 85 %
Pulsing cut-out
EN 60335
4,1 kVeff 50 Hz/1 Min.
EN/CE Standard
158 x 110 x 40 mm
650 g
Charger, charging-cable, mains cable and instructions
Subject to technical alteration. No liability assumed for typographical errors.
08/2001
IVT Innovative Versorgungs-Technik GmbH, Dienhof 14, 92242 Hirschau
Tel. 0 96 22 – 7 12 21 or 7 12 22, Fax 0 96 22 – 7 12 20
Internet:
www.IVT -Hirschau.de
E-Mail:
Info@IVT -Hirschau.de
EIN
CE
5
6
1
- +
IVT
Automatik
Ladegerät
für Blei-Akkus
12 V 6 A
Power l
Laden l
Laden l
2
3
4